Doepfer A-106 Xtreme Filter (MS20)
Xtreme Lowpass/Highpass Filter
- MS20 Filter clone
1–2 de 8 comentáriosLer todas as reviews
Not a straight MS20 clone - but awesome none the less
Now having said what this module isn't, I'll say what it is. Quirky, unusual, gnarly, crazy, raspy, openly-patchable, characterful - the list is endless. This is not a go-to bread and butter filter - take a look at the a106-5 sem filter if thats what you are after - but what it does, it does incredibly well. Balancing the input gain against the resonance and clipping levels can yield some incredible sounds - rasping brasses are a speciality for it. I also love using for drones as the deep lowpass with clipping is great when you patch out the resonance feedback path (I like using a189-1 vc bit mangler and a199 spring reverb on it). The filter responses are adjustable with trimmers on the board which is useful.
You wont find yourself using this on every patch, but it'll add so much to those weird and wonderful distorted sounds that you wont regret the investment.
The great sound of the MS-20 filter for your modular
This filter is a must for anyone with a eurorack modular.
Xtreme Lowpass/Highpass Filter MS20 Filter clone
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
Wasp Filter Special edition, Black front, Yellow knobs
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Mixer ModuleModule A-138 is a four-channel mixer that can be used for mixing control voltages as well as for mixing audio signals. A separate attenuator is available for each of the four inputs. In...
Doepfer A-100 LC1 Low Cost Case for Eurorack Modules; build-in Power Supply A-100SSB (+12V/380 mA, -12V/380mA); 48 TE Version of the A-100LC3; build-in Bus Board with 8 Module connectors; Housing...
Quad ADSRThe module contains 4 independent ADSR envelope generators. Each sub-module has the controls Attack, Decay, Sustain and Release. With the 3-stage range switch, the desired time range can be...
Module Dual linear/exponential, VCA
Spring Reverb ModuleDoepfer A-199 is a spring reverb module, which electronically simulates the reverb effect with the aid of spiral springs. Spring reverb systems have a characteristic sound...
Doepfer A-180-3 Dual Buffered Multiples, dual buffered 1-in-3 multiple to copying/buffering of control and audio signals, Width: 4 TE / 4HP / 20.0 mm
Doepfer A-111-2; High End VCO II / VCLFO; Width: 14 HP, Current: +70mA (+12V) / -50mA (-12V)
External Input / Envelope FollowerModule A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The...
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) /...
Noise/Random Voltage Generator Module A-118 is a noise and random voltage generator. It produces the following signals: white noise, coloured noise, and random voltage. White and coloured noise can...
VCA (Voltage Controlled Amplifier)The A-131 module is a voltage-controlled amplifier. An exponential VCA (A-131) is usually used for audio applications, while a linear VCA (A-130) is used for...
Wasp Filter Module A-124 is a special 12 dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies,...
Doepfer A-157 Trigger Sequencer Subsystem 1-2-3, contains: A-157-1 Trigger Matrix (8x16) + A-157-2 Output Module and A-157-3 Input Module, generate up to eight trigger signals controlled by a 8x16...
Basic VCO for the A-100 modular system Voltage controlled oscillator, 3-Position toggle switch, Linear FM input and soft-sync input, Tune control range can be set between approx. 1/2 octave and 4...
Analog and Trigger Sequencer for Modular System A-100 The following functions are available for the two analog rows (rotary knobs): 8 Rotary potentiometers, Scale (stepless knob) on the lower...
LFO Modulation Generator The module A-145 (LFO) is a low frequency oscillator, which generates periodic control signals in a wide frequency range. Five wave forms are available: saw tooth, inverted...
você economiza: € 13 (% 10,83)
|Número de artigo||178322|
|Unidade de venda||1 peça|
|Disponível desde||Junho 2005|
|ranking de vendas|
|nesta categoria||Classificação 125|
|em thomann.de||Classificação 30488|
- Indicar Doepfer Sintetizadores modulares
- Sintetizadores modulares Indicar na faixa de preços de 100 € - 140 €
- para o grupo de produtos Sintetizadores modulares
- para o grupo de produtos Sintetizadores
- para o grupo de produtos Teclados
- Mostrar Informações do fabricante sobre Doepfer
- Doepfer Teclados em resumo
- Versão de impressão desta página