157 Acertos. Visualizando artigos 1–25.
Todos os preços incl. IVA Frete grátis a partir de € 199
Não foram encontrados resultados :-(
Um dos filtros usados está a funcionar tão bem que não foi encontrado nenhum produto!
Um dos filtros usados está a funcionar tão bem que não foi encontrado nenhum produto!
Poderá remover os filtros e começar novamente ou utilizar o filtro seleccionado anteriormente.
Active DI Box (Battery/ Phantom Powered) Inputs: XLR and 6.3mm jack, Link: 6.3mm jack, Output: XLR, Output with ground lift, Pad: -20/ 40 dB, Galvanic isolation
- Inputs: XLR and 6.3mm jack
- Link: 6.3mm jack
- Output: XLR
Passive 8-Channel DI Box with up to 16 Inputs Mono summation over switchable merge in every channel, Switchable pad -10 dB, -20 dB, -30 dB, Switchable gnd lift per channel, XLR and link out per channel, Frequency range: 10...
- Mono summation over switchable merge in every channel
- Switchable pad -10 dB, -20 dB, -30 dB
- Switchable gnd lift per channel
Passive 2-channel DI-box Especially for laptops, Reduced humming noise, Firmly integrated 3.5mm stereo cable (1.5 m), 2x 6.3mm balanced jack out, Mono-summed XLR out, Switchable 15 dB pad, Switchable ground lift, Grey metal housing
- Especially for laptops
- Reduced humming noise
- Firmly integrated 3.5mm stereo cable (1.5 m)
Passive 2-Channel Dual / Mono DI Box 2 Inputs 6.3 mm jack, 2 Link outputs 6.3 mm jack, 2 XLR Outputs, Ground / lift switch, PAD switch (-20 dB / - 40 dB) suitable for keyboard, acoustic/electric guitar, bass,...
- 2 Inputs 6.3 mm jack
- 2 Link outputs 6.3 mm jack
- 2 XLR Outputs
Active DI Box Size: 19"/1U, 90 mm deep, 4 Channels, XLR output is also available as a parallel port on the back, The active circuitry allows for a high input impedance of 1 Mohm and greater sensitivity of the...
- Size: 19"/1U, 90 mm deep
- 4 Channels
- XLR output is also available as a parallel port on the back
Dual Transformer / Isolater Hum Eliminator, Frequency response 10 Hz to 50 kHz, THD: 0.01%, 2 Channels, Inputs and unbalanced XLR balanced, TRS, RCA, Output as balanced XLR, jack unbalanced, RCA, Dimensions 44.5 mm x 107 mm x 89...
- Hum Eliminator
- Frequency response 10 Hz to 50 kHz
- THD: 0.01%
Reamping box The Daccapo Box ensures optimal adjustments of impedances and prevents ground loops through the use of a transformer, The signal to the amplifier can be controlled by a volume control, Weight 0.29 kg
- The Daccapo Box ensures optimal adjustments of impedances and prevents ground loops through the use of a transformer
- The signal to the amplifier can be controlled by a volume control
- Weight 0.29 kg
Passive DI Box Direct Injection 1-Channel version, PAD switch (0dB/-30dB), Jack as an input connector, Balanced XLR output, Input impedance: 68 kOhm, Output impedance: 600 Ohms, Transfer ratio: 10: 1, Maximum output level: +6 dBu, Dimensions: 110 x 73...
- 1-Channel version
- PAD switch (0dB/-30dB)
- Jack as an input connector
Passive Stereo DI Box 2 Independent ProDI channels, 15 dB pad, Frequency response: 20 Hz - 18 kHz, Ground lift, Connections: Jack in / out, XLR out, Ideal for stereo sources such as keyboards, drum computers and digital recorders
- 2 Independent ProDI channels
- 15 dB pad
- Frequency response: 20 Hz - 18 kHz
Professional Stereo DI Box With Jensen transformers, Connectors: Jack in, RCA thru in, Jack / RCA thru and XLR in per channel, High-cut switch: 10 kHz, -15 dB pad and merge per channel, XLR in/out, 180° Phase reverse per...
- With Jensen transformers
- Connectors: Jack in, RCA thru in, Jack / RCA thru and XLR in per channel
- High-cut switch: 10 kHz
DI Box Superior phase coherence, Rupert Neve custom transformer, Input headroom of +21.5 dBU, Power supply 48 V phantom power, Ground lift, Instrument and speaker mode for various applications, Connections: in - 6.3 mm jack, thru - 6.3 mm...
- Superior phase coherence
- Rupert Neve custom transformer
- Input headroom of +21.5 dBU
Loadbox/Attenuator/Speakersim/DI Box All-in-one solution, For making perfect recordings of guitar and bass sounds, on stage and in the studio, Reactive load resistance, -20 dB power reducer, Analogue speaker simulation, DI Box, 8 Ohm version, Maximum amplifier power: 100 W...
- All-in-one solution
- For making perfect recordings of guitar and bass sounds, on stage and in the studio
- Reactive load resistance
Active Stereo DI Box (Battery) Input: Jack, KLI link pad +20 dB, 0 db or -30 dB switchable, 2 XLR outputs, Stereo or mono switchable, Ground lift, Galvanic isolation, Sturdy metal housing with corner protectors, 10 - 40,000Hz, Operates...
- Input: Jack
- KLI link pad +20 dB
- 0 db or -30 dB switchable
Line Level Converter Converts 2x unbalanced RCA in 1x balanced XLR male, Suitable for line devices, such as laptops, CD players etc. to microphone input of mixers/stageboxes
- Converts 2x unbalanced RCA in 1x balanced XLR male
- Suitable for line devices, such as laptops, CD players etc. to microphone input of mixers/stageboxes
4-Way Passive DI Box -30 dB, Ground lift switch per channel, Additional parallel XLR output on the rear, Gold Neutrik XLR connectors, Format: 19" / 1U, Depth: 60 mm, Made in Europe
- -30 dB, Ground lift switch per channel
- Additional parallel XLR output on the rear
- Gold Neutrik XLR connectors
Active Dual DI Box Can be operated via phantom power or 9V battery, The incoming signal via the high-impedance, unbalanced jack and balanced XLR connectors is converted into an isolated, balanced and low-impedance signal, Ground-lift switch, Frequency response: 10...
- Can be operated via phantom power or 9V battery
- The incoming signal via the high-impedance, unbalanced jack and balanced XLR connectors is converted into an isolated, balanced and low-impedance signal
- Ground-lift switch
Passive 4-channel DI box Transformer balanced XLR outputs, Input impedance: 68 kOhm, Output impedance: 600 Ohm, Ratio: 10: 1, Max. output: +6 dB, Ground/Lift switch, Format: 19"/1U, 5 Year warranty
- Transformer balanced XLR outputs
- Input impedance: 68 kOhm
- Output impedance: 600 Ohm
Active DI Box (Battery/Phantom) XLR/KLI in, KLI link pad -20 dB, XLR out, Ground lift, PAD, Galvanic isolation, Sturdy metal housing with corner protectors, Frequency range: 10 - 40,000Hz, Battery with 1x 9 Volt
- XLR/KLI in
- KLI link pad -20 dB
- XLR out
2-Channel Isolating Transformer in Cast Aluminium HousingIsolating transformers / line isolation boxes are used between line-operated devices to prevent ground loops. However, they can also be used for the conversion of asymmetrical to balanced lines. PLI-02 - Dual-channel...
- 2 Channel isolating transformers in cast aluminum casing, per channel:
- Input: XLR / f-jack combi socket
- Output: XLR / m
Passive DI Box In metal housing, Max. input level +10/ +50 dBu, Ground/ lift switch, With integrated switchable resistor network for extremely high input level (e.g. guitar box), XLR output, Dimensions (W x D x H): 100 x 130...
- In metal housing
- Max. input level +10/ +50 dBu
- Ground/ lift switch
6-Fold Active DI Box Front: Jack IN & OUT, Single -20db / -10db / 0db / 10dB input selector and GND-lift, Rear XLR-Out, Power supply, 19 "1U 8 cm Built-in depth
- Front: Jack IN & OUT
- Single -20db / -10db / 0db / 10dB input selector and GND-lift
- Rear XLR-Out
Miniature Transformer Symmetry AdapterCost-effective solution for unbalanced / balanced line conversion and passive DI applications that do not require grounding and amplifier switching. Typical Applications: • From the output of a DJ mixing console - Amplifier rack (long...
- With transformer
- Male XLR to Cinch phono jack 1: 1 - 200R / 200R - rod.
Active DI Box Especially for acoustic guitar, 48 V Phantom power, Jack input, Jack output, XLR output, 15 dB Pad switch, 180° Phase switch, Metal housing, Colour: blue
- Especially for acoustic guitar
- 48 V Phantom power
- Jack input
Passive Stereo DI Box 6.3 mm Jack input, 6.3 mm jack thru, XLR output, Switchable -15 dB pad, Switchable ground lift, Jensen transformer, Robust metal housing
- 6.3 mm Jack input
- 6.3 mm jack thru
- XLR output
Multi-channel DI Box with Line Mixer Master volume control, Frequency range: 20 - 20,000 Hz, Pad for input signal -20 dB and -40 dB/channel, Ground switch, Pan and volume control per channel, Headphone output (RCA), Robust metal chassis, Dimensions:...
- Master volume control
- Frequency range: 20 - 20,000 Hz
- Pad for input signal -20 dB and -40 dB/channel
Todos os preços são apresentados com IVA português, à taxa em vigor e válidos até ruptura do stock. Os portes de envio para Portugal continental têm o valor de 20,-EUR. Para encomendas de valor igual ou superior a 199,-EUR os portes de envio serão gratuitos. Para mais informações sobre o envio e entregas para outros locais, por favor clique aqui. Não assumimos responsabilidade por eventuais erros tipográficos ou informação imprecisa de qualquer tipo. *UVP = Preço de venda recomendado pelo fabricante / distribuidor para venda na Alemanha.
Produtos em destaque
- Mais vendidos