Cioks Pedaltrain Mounting Kit

Mounting Kit

  • With all the parts you need for Pedaltrain pedalboard (PT-1, PT-2 and PT-PRO)
28 Classificações de clientes:
  • 5
  • 4
  • 3
  • 2
  • 1
4.6 / 5.0
  • acabamento
Comentários para este artigo estão ainda apenas disponíveis noutra língua
13 classificações escritas Ler todas as reviews
gb Traduzido automaticamente (Mostrar original)
gbReview original (Mostrar tradução)
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
Total
acabamento

Perfect for older Pedaltrain boards

Adrian866, 30.10.2017
I bought this so that I could mount a VoodooLabs power supply underneath an original PT 1 Pedaltrain board. The original feet on these older boards do not lift the back of the board sufficiently far off the floor to do this, so a kit like this is ideal.

Took about ten minutes to fit and was relatively easy to do. No need to remove the existing feet, just mount the new ones alongside them. You will need a rivet tool, preferably a decent quality one capable of fitting this size of rivet.

I've used this board for several years of hard and regular use and the new feet have been solid as a rock.
Útil · Não útil · Reportar a crítica
Denunciar classificação…

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável?

Reportar
gb Traduzido automaticamente (Mostrar original)
gbReview original (Mostrar tradução)
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
Total
acabamento

Flexible and high quality PSU

FastEddy, 10.11.2015
I am a professional musician, and need to rely on good equipment that will quietly get on with its job. This unit provides clean power to a range of demanding pedals on my board, including TC Helicon and TC Electronics requiring up to 12V and 400mA. Prior to this, I required two PSUs. The DC10 is very solid and reassuringly heavy, and the mounting kit and plate made it easy to install beneath my Pedaltrain 2. Plenty of supplied leads etc. and the design is very good, in that once the power cable is connected you cannot change any DIP switches etc. The switch settings are also very flexible. You can always want for more, but to be honest, this pedal does everything I require, which I knew before I bought it. One thing do I miss over my previous unit is a local power on/off rocker switch, as when setting up at venues the power to stage invariably gets pulled on and off. I would normally cable up and leave the board off until everyone had finished, so now it is just a case of leaving it unplugged. A small inconvenience. The benefits of this unit far outweigh any limitations. Recommended.
Útil · Não útil · Reportar a crítica
Denunciar classificação…

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável?

Reportar
€ 8,90
Inclui IVA e € 20 envio
Envio gratuito de € 199
Disponibilidade imediata
Disponibilidade imediata

Este artigo encontra-se em stock e pode ser enviado imediatemente.

Informações sobre o envio
Partilhe este produto
O seu contacto
Tel: +49-9546-9223-20
Fax: +49-9546-9223-24
Todos os preços são apresentados com IVA português, à taxa em vigor e válidos até ruptura do stock. Os portes de envio para Portugal continental têm o valor de 20,-EUR. Para encomendas de valor igual ou superior a 199,-EUR os portes de envio serão gratuitos. Para mais informações sobre o envio e entregas para outros locais, por favor clique aqui. Não assumimos responsabilidade por eventuais erros tipográficos ou informação imprecisa de qualquer tipo. *UVP = Preço de venda recomendado pelo fabricante / distribuidor para venda na Alemanha.
Harley Benton Fusion-HSH Roasted Maple Slate Digital ML-2 DPA 4066-OC-A-F10-LH Slate Digital ML-1 IK Multimedia UNO Synth JHS Pedals The Bonsai Hercules Stands HCGS-414B+ Guitar Stand Zynaptiq Intensity Clavia Nord Music Stand V2 Tech 21 DP-3X Solar Guitars S2.6C K&M 17650 Guitar Stand
Recomendado
Harley Benton Fusion-HSH Roasted Maple

Electric Guitar Ergonomically shaped mahogany body, "Ultra Flame" flamed maple veneer top, Matching headstock, Bolt-on neck from "roasted" Canadian flamed maple, "Roasted" maple fretboard, Neck shape: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone...

Para o artigo
€ 371
(2)
Recomendado
Slate Digital ML-2

Small Diaphragm Condenser Microphone For Slate Digital VRS8 Thunderbolt audio interface, similar linear and flat frequency response to the Slate Digital ML-1, Allows microphone placement that is difficult or impossible for a larger microphone, Side mounted pad switch -...

Para o artigo
€ 159
Recomendado
DPA 4066-OC-A-F10-LH

DPA 4066-OC-A-F10-LH, d:fine CORE 4066 Omni Headset Mic, professional headset microphone with removable and adjustable neck holder for left or right-sided use. Omnidirectional, 20Hz-20kHz with 3dB boost between 8-20kHz, 144dB SPL max.,TA-4F Switchcraft connector for Shure Transmitter . beige, Great...

Para o artigo
€ 719
Recomendado
Slate Digital ML-1

Large-diaphragm condenser microphone Neutral ML-1 condenser microphone that can be combined with VMS hardware and software, Optional Neutral VMS preamp ensures minimal sound-colouration (not included!), Via VMS plug-in software, you can completely change the sound characteristics even after recording,...

Para o artigo
€ 859
Recomendado
IK Multimedia UNO Synth

Monophonic analog synthesizer with step sequencer, arpeggiator and effects section Classic setup with 2 VCOs and noise generator, multimode filters, amps, 2 envelopes and LFO, Waveform VCOs Triangle, sawtooth and variable pulse width rectangle, Multimode filter with 12 dB...

Para o artigo
€ 213
(1)
Recomendado
JHS Pedals The Bonsai

Effect Pedal Overdrive, 9 Tube Screamer Overdrive modes, 5 Classic TS circuits and 2 popular mods, Analogue operation, True bypass, Volume, sustain and tone controls, 9-Way rotary control to select between Tube Screamer modes (OD-1 / TS-808 / TS-9...

Para o artigo
€ 259
Recomendado
Hercules Stands HCGS-414B+ Guitar Stand

Hercules Stands HCGS-414B +, AGS PLUS Guitar Floor Stand for All Electric Guitars / Electric Basses / Acoustic Guitars/Mandolinen/Banjos and Ukulelne, Auto Grab Holder automatically secures the instrument from falling out, (for standard widths of 40-52 mm) with improved foam...

Para o artigo
€ 44
Recomendado
Zynaptiq Intensity

Zynaptiq Intensity (ESD); enhancer plugin; innovative algorithm increases detail, clarity, density and loudness of any audio signal; suitable for single tracks, groups, mixbus or mastering; easy to us clearly arranged user interface; additional soft-knee saturating limiter at the output stage;...

Para o artigo
€ 150
Recomendado
Clavia Nord Music Stand V2

Clavia Nord Music Stand V2 - music stand for Nord C2 Combo Organ, Nord C2D, Nord Electro 3 HP, Nord Electro 4 HP, Nord Electro 5 HP, Nord Electro 6, Nord Piano 88, Nord Piano 2 HA88, Nord Piano 2...

Para o artigo
€ 69
Recomendado
Tech 21 DP-3X

Preamp for bass dUg Pinnick signature model, Controls: volume, chunk, high, mid, low, comp, drive, Gain switch, Mix button, Chromatic tuner, XLR DI output, TRS input / output, Headphone output, Dimensions (W x D x H): 19.7 x 6.4...

Para o artigo
€ 299
(1)
Recomendado
Solar Guitars S2.6C

Electric Guitar Body: Mahogany, Neck: Maple, Fretboard: Ebony, Neck profile: C, 24 Super jumbo frets, Graphite nut, Nut width: 43 mm, Scale: 647 mm, Pickups: 2 Duncan Solar humbuckers, Grover 18:1 locking machine heads, Colour: Carbon matte

Para o artigo
€ 639
(2)
Recomendado
K&M 17650 Guitar Stand

Guitar Stand - Carlos Tall A-frame design, Can be folded flat, Support arms include protective felt pads, Suitable for guitars with nitrocellulose lacquer finishes, Neck lock (Security Lock), Colour: Black, Support depth: 125 mm, Dimensions: 410 x 515 mm,...

Para o artigo
€ 69
Feedback Encontrou um erro ou pretende dar-nos a sua opinião sobre esta página?

Estamos ansiosos pelo seu contacto e ajudaremos na resolução de qualquer problema o mais rápidamente que pudermos

Por favor deixe um comentário. Por favor introduza o seu endereço de email.