Adam Hall PCL 10 Pro Power Conditioner

100

Power Conditioner

  • With rack lighting and volt / ampere display
  • Mains current filter and power distributor with 10A including pull-out rack lighting
  • Total load up to 2000 watts
  • AC Noise filter to reduce interference from radio frequencies and electromagnetic interference < 20 dB, 1.5 MHz - 200 MHz
  • Overcurrent protection
  • Circuit breaker
  • Suitable for all applications in recording and on stage
  • 8 Switchable connections on the rear + 1 unswitched on the front
  • Mains switch at the front
  • Dimensions (W x H x D): 482 x 190 x 44 mm
  • Construction: 19" / 1 U
  • Includes 4 cold device cables
Disponível desde Abril 2015
número de artigo 360186
unidade de venda 1 peça(s)
Number of Outputs 9
Connector For Lamps Yes
Voltage Display LED
Design 19" / 1U
Total load 10 A
€ 266
Envio gratuito, IVA incluído
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Terça, 2.04.
1

100 Avaliações de clientes

4.7 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

características

acabamento

46 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Introduced more noise, not less
Stian_H 10.03.2022
I have had very little luck with this, overall I would say it seems more suitable for maybe a PA system, than for home studio use.

When I had my computer equipment powered through this, instead of reducing emissions, it acted as a rebroadcaster, meaning I had the interference from the computer hitting me from both sides, instead of reducing it.

This seems to be a common issue with power conditioners, not specific to this particular model. The conditioner tries to remove noise from the mains, but if you plug in gear that itself produces noise, it will instead create a common grounds issue, instead of removing anything.

Aside from that, however, the unit itself produces noise hitting everything around it, simply by being powered on with nothing plugged in it produces noise.
Even with balanced cables, it adds a high pitched whine and hiss to the signal, meaning you have to keep all audio gear away from it.

The only way I can see this being useful, is if you keep it completely separate, plugged into a separate power circuit, and physically far away from instruments or audio cables, which defeats the purpose for my intended use.
características
acabamento
7
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Too noisy to be good
Stevensson 10.12.2021
A while back I built my first rack and off course I was pretty sure I needed a power conditioner (many youtube clips will tell you why). The Adam Hall seemed about right in the quality for money range. At first I did have a few issues with what seemd like a faulty connection (you would here the electricity sparkle) but I could solve that. Today - upon - building an on desk rack, I suddenly realised this conditioner makes a whole lot of noise (even when just plugged in and doing nothing), so I decided to use a basic unconditioned socket (also from Adam Hall). At least it got rid of the noise and to be honest, everything worls like a charm, so I'm still guessing why I thought I needed a conditioner in the fierst place. Looks good, seems of decent build quality. Only buy if you enjoy a 60 cycle hum.
características
acabamento
7
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
JL
Broke within a few months
James Lupson 26.11.2020
on arrival it felt cheap, then one outlet died in a few weeks, and now its dead completely.
características
acabamento
4
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
B
Does exactly what it says on the tin
Binraider 22.04.2018
I had a ground loop and high frequency noise issues associated with the power supply in my home studio. Between this and a ground loop isolator it's fixed the problem. The rack mount is well thought out and would be good on the road. Only one minor problem. The IEC sockets dont have the greatest grip in the world, something to better secure cables in place might be helpful. A symptom of the standard socket design, not the device...
características
acabamento
1
0
Reportar a crítica

Reportar a crítica