Velcro Hook Tape 20mm

679

Velcro Grommet

  • Self-adhesive
  • Width: 20 mm
  • Roll with 5 m
  • Colour: Black
  • Velcro fastener webbing tape is also required (216583)
Produkt dostępny od Sierpień 2008
Numer artykułu 216582
Jednostka sprzedaży 1 szt.
Component type Hook And Loop Fastener
Type Velcro
Container Size 5
Packaging unit M
Pokaż więcej
95 zł
19 zł / m •
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Rabat ilościowy
Cena jednostkowa Oszczędzasz Ilość
95 zł 1
89 zł 6,3% 3
84 zł 11,6% 5
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Czwartek, 4.04. and Piątek, 5.04.
1

679 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

231 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
OS
Vaut le prix
Oncle Sim 15.05.2021
Ces bandes collent très bien aux surfaces sur lesquelles on les applique, pour peu qu'on chasse bien les bulles d'air et qu'on attend 10-20min avant d'acrrocher quoi que ce soit dessus. Parfait pour installer des appareils non-rackables dans des racks qu'on transporte.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Velcro. The pedal fan's friend
Paul8331 19.02.2014
Getting good velcro for use on pedal boards is difficult. The velcro that can be bought in most shops is not strong enough for attaching pedals to a floorboard that will get stamped on every day. I use a Pedal Train board with about 8 pedals on it. Some of them are quite heavy and I want them to stay where I put them. This velcro does that. It is a good width and it's easy to cut and apply to pedals either in a single strip or 2 strips if the pedal is big enough to need it. As with all velcro though, there is a slight issue - it doesn't stay stuck to pedals with heavy rubber bases, like the usual bottom of a Boss pedal (and many others). The glue doesn't stick to the rubber properly. So this is excellent on metal or plastic, but not as good on rubber bottom pedals. Perhaps one day someone will make a velcro that will stick properly to the rubber as well. We can hope!
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
It goes a long way!
MatthewG 29.01.2014
A little of this tape goes a long way so far half a real has done several iterations of my board and my dads boards and is still going!
it sticks well to most pedals, as well as any other tape on the market and fixes securely to velcro in fact i had trouble removing my morely wah from the board it was so well stuck down!
the glue that holds the rubber on the back of a pedal will go before this stuff does so it has maximum points for durability infact the only problems that are to be had with this tape are that it will not stick to some pedals (Mooer) but this is easily solved by removing the base of the pedal and replacing it inside out and sticking it down that way.

As good as any other velcro tape on the market without the mark up, so why would you buy any other?
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
s
Essential
swlover 23.09.2019
I was able to conceive, design and set up a quite complex rack-mounted electronic music system around a semi-modular synthesizer thanks to Velcro. This is the original one, with definitely better sticking material, so don't waste your money elsewhere.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie