Truetone 1 Spot Pro CS6

170

Multi-power supply for effect pedals

  • Flat design
  • Switched-mode power supply technology
  • Dimensions: (W x D x H) 160 x 88 x 31 mm
  • Weight: 590 g

Connectors:

  • Output 1 and 2: 9V DC @ 500 mA (completely isolated)
  • Output 3 and 4: 9 / 12V DC @ 200 mA (completely isolated)
  • Output 5 and 6: 9 / 18V DC @ 100 mA (completely isolated)

Cables included:

  • 1x 5.5 x 2.1 mm coaxial connector to 5.5 x 2.1 mm coaxial connector, length: 66 cm
  • 1x 5.5 x 2.1 mm coaxial connector to 5.5 x 2.1 mm coaxial connector , length: 55.9 cm
  • 1x 5.5 x 2.1 mm coaxial connector to 5.5 x 2.1 mm coaxial connector , length: 45.7 cm
  • 3x 5.5 x 2.1 mm coaxial connector to 5.5 x 2.1 mm coaxial connector, length: 30.5 cm
  • 1x 5.5 x 2.1 mm coaxial connector to 2x 5.5 x 2.1 mm coaxial connector , length: 66 cm
  • 1x reverse polarity adapter (5.5 x 2.1 mm) coaxial connector to 5.5 x 2.5 mm coaxial connector
  • 1x reverse polarity adapter (5.5 x 2.1 mm) coaxial connector to 5.5 x 2.1 mm coaxial connector
  • 1x 5.5 x 2.1 mm adapter coaxial plug to 3.5 mm mini jack
  • 1x 5.5 x 2.1 mm adapter coaxial plug to 9V battery clip
Produkt dostępny od Listopad 2017
Numer artykułu 422609
Jednostka sprzedaży 1 szt.
DC/AC current DC
Output current in mA 1600 mA
9 V Yes
12 V Yes
18 V Yes
Secondary voltage No
Multi-output power supply Yes
649 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 20.04.
1

170 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

118 Opinie

W
Nie ma innej opcji
WhyInTheGodsNameUNeedHereAUniqueName? 17.02.2021
Ten zasilacz rozwiązał wszystkie moje problemy z dziwnymi zakłóceniami w łańcuchu sygnału na podłodze z efektami. Idealnie się nadaje do niskoprofilowych boardów. Dołączony szablon pozwala szybko nawiercić otwory - jeżeli są potrzebne. 2 x 500mA, które spokojnie potrafi uciągnąć nawet bardziej pazerne efekty. Dołączone kable bardzo dobrej jakości. Za tą cenę nie ma sobie równych.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

z
znakomity zasilacz
zitom 29.10.2019
Zasilacz niskoprofilowy. Idealnie pasuje do pedaltrain metro i nano. Bezkonkurencyjna jakość. Super stabilne parametry, To już mój drugi zasilacz Trutone. Pierwszy CS12 działa od kilku lat w dużej podłodze. Teraz przyszła kolej na bardziej mobilny zestaw. Polecam!!!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
You can't go wrong
Paul7411 11.02.2020
I was coming from the classic 1spot single power unit. I had this device for years and years with a long daisy chain of 8/9 pedals, and never had a single problem. Now I was rethinking my pedal board, bought some new pedals, also digital, for a total of 10. So I thought it was about time to make things look a little more clean and professional and I got this CS6. The 1spot with all the pedal was starting to hissing a bit, when I plug the CS6 the thing was DEAD quiet!

The box is slim and quite light, you can have it under or over your board. I've got a palmer/harley-benton board and I had no problem fixing it under the board with just some velcro. There are various mA level outlets but actually, if you see truetone videos, all can feed whatever mA needs your pedal, just be shure to not overpower the total amount of mA available. You can also plug daisy chains if you have more than 7 pedals (I say 7 because there's already a Y cable provided). Other thing the manual doesn't say is that the power supply sports two blue led on the short sides, witch add a little coolness to your board! Nice touch. The price is also very competitive, no need to get fancier stuff. Completely satisfied!
wykończenie
3
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Useful for most pedalboards
JIC 03.03.2020
This unit powered my whole board, including 4 stompboxes and a Boss MS-3 and Digitech Whammy 5. I've never had any noise issues other than from my Strat pickups. I used the included template to screw the unit to my board, but Velcro / Dual-Lock should work just as well.

PROS
- 2x 500mAH (enough power ANY 9V DC pedal)
- 2x 18V - added headroom to my MXR Boost/Line Driver and BE-OD
- One IEC cable (kettle plug) to power everything.
- Clean, low noise sound
- Low profile

CONS
- Output placements might be inconvenient for certain pedalboards
- Dip switch placement might also be inconvenient for certain pedalboards

As far as handling, the 1 Spot Pro CS6 delivers clean and reliable power. Pedalboards are all different though, so make sure you have enough current draw for YOUR pedals and that the dimensions are correct and that you can easily access the outputs and dip switches.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat