Thon Case Zoom LiveTrak L-8

8

Flight Case

  • Suitable for the Zoom LiveTrak L-8
  • Material: 6.8 mm Plywood, coated with phenolic resin
  • 22 x 22 mm Aluminium edges
  • 2 Small butterfly latches
  • 1 Suitcase handle with lid
  • 8 Small rounded ball corners
  • 4 Rubber feet, 25 x 15 mm
  • Foam padding
  • Unit can be operated in the bottom section
  • Place for cables in the rear
  • Outer dimensions (W x D x H): Approx. 332 x 432 x 140 mm
  • Weight: Approx. 3 kg (with unit, approx. 4.6 kg)
  • Colour: Brown
  • Made in Germany
Produkt dostępny od Listopad 2020
Numer artykułu 502745
Jednostka sprzedaży 1 szt.
made for Zoom
Type Case
Material 7 mm Plywood
Wheels No
Dockhouse No
Strap Handles 0
Flip Handles 0
Dimensions in mm 332 x 411 x 157
Colour Brown/Alu
Weight 3,9 kg
Options 22 x 22mm Alu Profile, 2 small Butterflys, 1 Grip, 8 small Ball Corners, 4 Rubber Feet 25 x 15 mm
External Width 332 mm
External Depth 411 mm
External Height 157 mm
Pokaż więcej
633 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny za 2-3 tygodnie
Dostępny za 2-3 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

8 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

7 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Snug Fit - never have to worry about storage and transportation again.
MediaMill 23.05.2023
Perfect case for the Zoom LiveTrak L-8. Good sturdy construction, with plenty of foam padding to keep the mixer safe and secure - it is a snug fit and will never have to be taken out of the case once it's in (unless you're changing the batteries). Rubber feet on the underside also do a good job of keeping the case in situ.

There is a bit of space left at the back of the mixer so that you can access the SD card slot without having to take the mixer out of the case. You can also use this space for storing the likes of the power cable. That said, the space itself is small so you won't be able to fit much else, especially if you have to use an EU-UK plug adapter like myself, which just about fits.

The main area of improvement would be the quality of the butterfly latches. They are a little flimsy, but get the job done. I would have preferred if they were mounted 'upside down' so that it was easier to take the lid off the case, but that's a very minor gripe considering the overall high build quality.

In summery - sturdy construction, snug fit, will never have to worry about storage and transportation again.
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie