Thon Case Boss GT-8/GT-6B

44

Guitar And Bass Effects Transport Case

  • For Boss GT-8 and GT-6B
  • Material: 7 mm Plywood
  • 22 x 22 mm Aluminium edges
  • Min. 1 cm foam padding
  • 1 Case handle
  • 2 Spring-loaded butterfly latches
  • Small steel ball corners
  • 4 Rubber feet
  • Space for power adapter
  • Device can be operated from the case
  • Exterior dimensions (W x H x D): 61 x 15.5 x 40 cm
  • Weight empty: 5.83 kg
  • Weight with GT-8: 10.96 kg
  • Colour: Phenol Brown
  • Made in Germany
Produkt dostępny od Maj 2005
Numer artykułu 181794
Jednostka sprzedaży 1 szt.
Number Of Effects 1
Incl. power supply No
Effect Send/Return No
Incl. Gigbag No
Incl. Case Yes
738 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 24.04. and Czwartek, 25.04.
1

44 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

wykończenie

23 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
PK
Thon Flight Case for Boss GT6-B
Peter K. 891 30.06.2013
A sturdy well-made case for the Boss GT6-B Bass Multi-Effects Unit. The Unit sits in the lower part of the case and in transit is held from moving around by a large foam pad which forms the interior of the top part of the flight case. There is room for the voltage adapter and probably leads as well.

Easy to set up on stage; just remove the top of the case, connect up and the unit can be left sitting in the botton of the case as shown in the illustration above.

The case and unit are not light and my only concern is whether the plastic carrying handle is robust enough. The turn-buckle latches need to be properly located before securing; several times I thought I had locked one side to see I had missed the part of the catch in the bottom half on the case.

I'm pleased with this purchase. I bought my Boss unit in new condition and this case will help ensure it stays that way.
montaż
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
You could drop this from a plane and it would be ok
BrettS 21.07.2014
I am using my case for a Boss GT6...it has the same footprint as the GT8 and I am able to fit the power supply, pedal board and a DI (which I like to periodically use to patch into the PA and cabinet). It is well- built with adequate foam padding and good locks. A note: After 25 years doing audio professionally I got smart and marked my lid and base to match them up when closing the case. Cases are built a certain way but often times they don't fit as sweetly in the wrong direction. Do yourself a favour and take a sharpie and mark this box (and any like it) with a symbol to denote the proper orientation before you forget. I highly recommend these Thon cases
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Worth the money
Anonimowy 22.06.2014
Great case for the job, the GT-6 fits very well into the case, and with the option to lift off the top lid while the unit is still in the bottom part of the case, it stops the person who comes up to request songs from kicking the leads as i have had happen in the past, so good all round, keeps it safe in transit to/from gigs and adds some protection from heavy footed music (drunken) fans
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Thon Case for GT-8
Tony2565 20.02.2018
I use this case to protect my GT8 while gigging.

The case is manufactured to very high standards and is very robust so I have every confidence that my GT8 will be safe while in transit and in use on stage.

It is a "use in base" design where only the top is removed for use. There is good access for cables and the base protrudes enough to help prevent jack plugs getting knocked while in use etc

Excellent case and well recommended.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie