Thomann Rack Case 10U

208

Rack Case 10U

  • Case made of hard, impact resistant plastic
  • Installation depth: 42 cm
  • Lid depth: 7 cm
  • 2 Handles
  • 4 Butterfly latches on each lid
  • External dimensions approx. 56.5 x 57 x 52 cm
  • Design type: 19" / 10 U
  • Screw set included
  • Weight 7.6 kg
  • Optional replacement screw available under article no. 294919
Produkt dostępny od Maj 2010
Numer artykułu 241139
Jednostka sprzedaży 1 szt.
Formfactor 19"
Construction Type Double-Door
Vertical Height Units 10 U
Internal Depht [mm] 420 mm
Horizontal Height Units 0 U
with display stand No
Rack rail at the back Yes
Service flap No
With Wheels No
Trolley No
Shock Mount No
Clasps Butterfly
Material Plastic
Colour Black
External Width 565 mm
External Height [mm] 520 mm
External Depht [mm] 570 mm
Weight 7,6 kg
Pokaż więcej
629 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 20.03.
1

208 Oceny klientów

4.3 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

107 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Great quality rack case that stacks with gator cases
Millo777 18.06.2020
I bought the Thomann branded rack case because it was cheaper than the gator or SKG versions. When It arrived I was surprised that it just as good quality, and also stacks with my other gator cases with no problem.

I wouldn't use this to tour or ship expensive gear all over the world, but for keeping my rack gear pre wired, ready and dust free its ideal.

other things of note. The rack mount screw holes are properly aligned! I've got other brands of rack case where the threaded strip is separate from the case and misaligned, so the lower units in the rack are a pain in the ass to fix in place. You end up holding the gear in place with 2 screws instead of 4. On both of my Thomann cases, the threaded strips were fixed in placed and perfectly aligned. Good stuff.

It doesn't have locks, but then the locks on other cases are worthless so that no loss.

If only Thomann would start selling their own version of shock mount cases!
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
RC
Nice Rack case
Rene C 13.09.2022
It is a very nice rack case. It is sturdy and complete.
The handles to pick it up are ok. could have been a bit deeper for my big hands.
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
w
Not a bad
w9ahmed 14.01.2022
Not sure if its the best in the market, but for the price its good. I don't tour, so I don't need something strong, also I never tried any other rack case to compare with.

To my knowledge, I would recommend it to home musicians; if I try any other brands I will edit my review. :)
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
light weight 10U case for not much money
Andrew551 20.09.2015
Pro:
+ low cost
+ light weight
+ strong (enough)
+ comes with a bag of screws and plastic washers
+ front and back lids close securely
+ full rack both front and back - this is very useful for adding power distribution or patch bays on the back, especially as the unit is quite deep.

Con:
- Rack screws fasten into a plate with threaded M5 holes. This plate goes the full height and doesn't always line up with the equipment very well. It has not got the play a captive nut would have to take up any miss alignment. Additionally if you struggle long and hard enough to get your equipment mounted you can end up stripping a thread which is then irreplaceable. (But could be tapped out to M6)

Other remarks:
The M5 screws part 294919 are slot headed. The case comes with cross headed screws.
There are no air holes. This is good in terms of carrying them outside through the rain but a drawback in terms of cooling. Put in a few plates with air vents like 214126 or 120517

Overall a good buy
stabilność
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie