Thomann Case Soundcraft EFX8 EPM8

291

Mixer Case

  • Suitable for Soundcraft EFX 8 and EPM 8
  • 1 Case handle
  • Inner dimensions (W x D x H): 370 x 370 x 100 mm
  • Height of lower part: 90 mm
  • Height top part: 10 mm
  • Outer dimensions (W x D x H): 400 x 440 x 145 mm
  • Weight: 2.8 kg
  • Colour: Black
Produkt dostępny od Październik 2011
Numer artykułu 267783
Jednostka sprzedaży 1 szt.
made for Soundcraft
Type Case
Material PVC/Aluminium
Wheels No
Dockhouse No
Inner width 370 mm
Inner depth 370 mm
Inner height 100 mm
Colour Black/Alu
Weight 2,8 kg
External Width 400 mm
External Depth 440 mm
External Height 145 mm
Pokaż więcej
238 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 17.04.
1

291 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

135 Opinie

I
Porządny case.
ImprezyPoByku 26.08.2020
Porządny case. Prosty i wygodny. Używam do Soundcraft EFX 8. Polecam produkt!
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

t
Dobry produkt
thomann_client 15.12.2018
Swietna ochrona dla miksera, lekkie, eleganckie, kompaktowe, poreczne opakowanie. Wygodne do przenoszenia czy przewozenia.
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
JB
SAVED MY DESK
Jack B. 31.07.2017
So I've had my case for nearly two years, it not only contains my desk but an interface (Roland Duo) Headphone amp, cables and power all tucked just underneath the desk.
The catches did start to show a bit or wear and tear but for the amount of use it gets that is to be expected.
However the important bit is how well does it do the job of a hard case? the answer is very!
Last weekend while working a family festival rather foolishly left my desk in front of the wheels of my car. and after loading everything else decided to drive away.... straight over my case with my desk and all the extras nestled inside. a little confused to the bump i carried on before running over it with the back wheels for good measure. unsuprisigly the case is totalled splintered cracked buckled and warped but to my surprise, inside its caracas everything has survived without even a scratch all dials attached and straight.

So here i am buying the same case again to replace the flat one, so it can continue to protect my desk after its comrade gave its life to do so.
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
R
Does exactly what you expect
R.V. 29.05.2017
Great choice for safer and more comfortable transportation with a cheap price.
I bought Thomann Mix Case 4044I as a hard case for Soundcraft EFX 8 Analog mixing desk, we used to actively use it for about 6 month after which we switched to a different mixing desk. So far it has proven to be trustworthy, durable, able to withstand sizable amounts of weight (As we don't have a big car, we had to put all hard cases including this one in the bottom of the car. All the musical instruments, drums were put on hard cases to save space for other gear. It became a routine every time we had to play a concert using our own gear to put this case in the bottom or middle).
Pros:
1) Durable and trustworthy
2) Reasonable price, even cheaper than some cases made from cloth
3) Has enough space for mixer + a few wires which helped us save a little space in our small car as well
Cons:
1) Henges are made from plastic, but still have a strong feel
2) Inside the case is completely flat, "rubberlike", safer amortisation could be achieved with cube foam.
0
0
Zgłoś nadużycie

Zgłoś nadużycie