the t.bone free solo duo Rackmount

45

Rack Mount

  • Suitable for installing two 1U "free solo" receivers
  • Consists of 2 side parts and 2 middle parts
  • Complete set: includes all necessary screws
Produkt dostępny od Lipiec 2014
Numer artykułu 335965
Jednostka sprzedaży 1 szt.
Type Duo
77 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 24.04. and Czwartek, 25.04.
1

45 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

21 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
JW
Great alternative for LD System u500 series but NOT for mei 1000g2
JL Wong 28.01.2023
Fits the LD System u508 perfectly but doesn't work for the LD system Mei 1000g2 as the width of each unit is shorter than the u508 (by around 1.5cm each) hence the rack ears will not be able to extend out to the typical 19", an alternative would be to add spacers between the unit and the rack ears but you would require around 3cm of extra spacers.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Hat gut geklappt!
Andu1701 18.03.2022
Wir benutzen diese Rackmounts für unsere LD-Systems Wireless Transmitter. Hat gut geklappt und ist günstiger als die Alternative aus dem eigenen Hause.
Passt!
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
It worked!
DjMaximal 06.08.2020
All screw holes corresponded exactly to the dimensions of the device.
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
F
Super Produkt mit kleiner Einschränkung
Felix959 02.11.2015
Das Produkt ist recht ordentlich, mit etwas Vorstellungskraft ist auch die fehlende Montageanleitung kein Problem :)
Leider findet sich zwischen den beiden Empfängern ein Spalt von ca. 5mm, sieht nicht sonderlich schön aus, hier wäre eine Abdeckung wünschenswert gewesen...

Kurze Montage-Anleitung:
1) Die Winkel werden ganz normal an der jeweils caseseitigen Seite der Empfänger verschraubt
2) Auf der "inneren" Seite der Empfänger werden die Montageplatten montiert, das Langloch hinten mit der Gehäuseschraube, die anderen vorne mit den mitgelieferten Schrauben in die entsprechenden Gewinde.
3) Jetzt die Empfänger zusammenschieben, bei den Montagebügeln ist auf einer Seite für den Senkkopf vorgebohrt, die Seite natürlich außen. Dann nur noch von oben und unten verschrauben und ab ins Case :)
obsługa
właściwości
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie