StudioRTA Producer Station

587

Professional Recording Workstation

  • With built-in 19" racks above and underneath the main work surface
  • A total of 33 U rack space (2x 14 U below and 5 additional U located centrally above the work surface)
  • Pull-out keyboard shelf for keyboards of up to 8.25 cm in height
  • Upper shelf for speakers and computer monitor
  • Lower shelf for computer and printer
  • Built-in CD rack for up to 16 CDs
  • Huge worktop with a width of 183 cm and a depth of 76 cm
  • Robust steel framework that can still be moved easily with 8 castors (2 with locking brake)
  • Dimensions of table (W x H x D): 183 x 76 x 76 cm
  • Dimensions top unit (W x H x D): 152 x 28 x 39 cm
  • Dimensions keyboard shelf (W x D): 670 x 300 mm
  • Colour: Black/Maple
Produkt dostępny od Kwiecień 2005
Numer artykułu 177479
Jednostka sprzedaży 1 szt.
Colour Black, Beech
Keyboard Excerpt Yes
Rackunits 33 U
Width in mm 1830 mm
Depth in mm 760 mm
Height in mm 760 mm
Adjustable Height No
Wheels Yes
Keyboard Excerpt (W x D x H) in mm 670 x 300 x 82
1 275 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
1

587 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

właściwości

wykończenie

335 Opinie

b
Czy kupilbym raz jeszcze - tak!
blinket 03.03.2021
Biurko jest super. Bardzo duze, pojemne, masa miejsca na urzadzenia rackowe. Wykonanie jest ok, ale jest pare rzeczy do których mozna sie przyczepic:
- Zbyt mala wysuwana pólka, miesci sie ledwo klawiatura komputera, albo jakas malutka klawiatura MIDI, wolalbym szeroka pólke na pelnowymiarowa klawiature albo chociaz 49-klawiszowa
- Plyta meblowa z której zrobiony jest blat / podstawa nie jest najwyzszej jakosci - 2 kólka po kilku miesiacach po prostu odpadly (a biurko praktycznie nie bylo przesuwane). musialem wymienic oryginalne wkrety na szersze, zeby sie jakos trzymaly
Ogólnie jestem bardzo zadowolony, zwaszcza za te cene.
właściwości
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

a
prawie idealnie...
agaart 03.01.2022
Kółka w tym zestawie to chyba żart ...stół OK
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

z
Swietnie wykonany!
zwaszrut 06.09.2016
Znakomita jakosc wykonania i doskonala funkcjonalnosc
właściwości
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Z
Almost perfect
Zwavelbron 02.07.2020
After searching online for weeks and comparing many, MANY different offerings, I decided to go for this workstation because it seemed to have everything I needed:
- Wheels, so I can move it around and reach the cables behind it more easily for maintenance etc.
- Solid looking build
- Platform on the bottom that allows me to put my desktop PC, UPS, and subwoofer there
- Sufficient amount of rack space and useful distribution
- Keyboard drawer, so I can have my MIDI keyboard on top and my PC keyboard in the drawer - everything ready when I need it
- The additional top surface consists of a single section - my studio monitors have their own stands, and I prefer having a 'middle section' to put my screens on, as opposed to 'left and right sections' intended for putting studio monitors on
- Affordability
- CD racks for all of the CD's I bought last century! (just kidding, I left those things out to increase my usable surface area, which does not seem to affect structural integrity)

Came very well packed (you can build your own village out of all the cardboard). Build feels solid. I finally have all the space I needed and every centimeter is useful. Due to the added weight of all my gear, it doesn't roll away by itself (I'm not even using the brakes), which is good. But it will still roll if I push it hard enough, which was my original requirement.

As for the downside: The top spaces in all 3 rack areas don't seem to fit any of my 19" hardware, so I have to leave it empty, causing a gap and reducing the amount of usable rack space.
This is not a major problem for me, since I never intended on filling them up completely anyway, and from my seat I can't see the gaps. In fact, the gap in the top rack has a nice side-effect; it allows me to clearly see all buttons and lights on my 1U recording interface, which has been relocated into the second-to-top rack slot due to the top one not fitting.

I did struggle with another 1U item as well. Though I did get it into the rack almost where I wanted it, I had to leave out the top screws because the hole was misaligned. Not 100% sure if that's due to the rack in this desk or the sizing of that 19" unit, but it had been in another rack before without issues. To put this in perspective though, the other 19" equipment I put in the rack (5 items varying from 1U to 3U) fit just fine.

In the end, I'm extremely happy with this workstation. I have a mix of rack gear and other stuff, and I got all of it in there in the way I wanted. However, if you intend to fill up every single rack slot, you'll probably be disappointed (unless you're good at DYI and figure out some alternative solution).
właściwości
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat