Thomann LED Par Rain Cover 35 XL

Rain protection hood for LED PARs

  • With this rain protection hood you can secure your LED Pars against rain and other undesired liquids for example in clubs etc
  • This LED Par rain cover is simply used as a hood, to be placed as cover over the spotlight
  • This article only serves to protect against spray water
  • Due to the excellent transparency of the hood, the luminous efficacy is almost not affected
  • Dimensions: (L x W x H) 35 x 35 x 40 cm
  • Made in Germany!

Dalsze informacje

Accessory Type Rain protection

Tak wybrali inni klienci

Klienci, którzy oglądali ten artykuł kupili:

Thomann LED Par Rain Cover 35 XL
43% klientów kupiło dokładnie ten produkt
Thomann LED Par Rain Cover 35 XL
Artykuł dostępny w magazynie
Artykuł dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki
24,90 € Do koszyka
Thomann LED Par Rain Cover 25 L
27% klientów kupiło Thomann LED Par Rain Cover 25 L 14,90 €
Thomann CLB LED Rain Cover 76
5% klientów kupiło Thomann CLB LED Rain Cover 76 28 €
Stairville IP Bar IR Remote
5% klientów kupiło Stairville IP Bar IR Remote 11 €
Thomann Stage TRI LED Rain Cover 130
4% klientów kupiło Thomann Stage TRI LED Rain Cover 130 45 €
Najpopularniejsze Akcesoria do LED PAR
17 Oceny klientów:
  • 5
  • 4
  • 3
  • 2
  • 1
4.6 / 5.0
  • właściwości
  • wykończenie
Aktualnie ten produkt posiada ocenę tylko w innym języku.
Liczba pisemnych ocen 9 Wszystkie oceny
gb Tłumaczenie automatyczne (Pokaż oryginał)
gbOryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
właściwości
wykończenie
Just perfect!
Norty303, 20.02.2015
I'm a laser show provider and I'd been wondering how I was going to weatherproof my laser projectors at outdoor festivals last summer. It turns out that these covers are pretty much exactly the same dimensions as my laser projector cases, so if I pole mount from underneath, the cover sits perfectly over the case and also the yoke underneath. This means there is enough 'skirt' to also cover the signal and electrical connections stowed underneath.
I had to cut a small aperture in the front to allow the laser beams out but as the front of the case is flat with no openings this didn't present an issue.
In use, we had a torrential downpour on the saturday night which lasted about 4 hours. When we closed the stage on Sunday morning one of the covers had formed a puddle on top, all the way to the seams on the edges. Not a drop of water had come in. Very impressive, especially considering what i was going to pay to have some made up! These will also probably be going out to Burning Man festival to work as primary dust defense for when the wind gets up.
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
gb Tłumaczenie automatyczne (Pokaż oryginał)
gbOryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
właściwości
wykończenie
they should also make a mini version!
Henry9665, 16.02.2017
great! They should also make a mini version of this to fit inside an F34 truss leg! I used the material for one of these covers to sow together 2 small custom covers in order to protect the Eurolite LED TL-3 TCL light units that light the truss internally - the units that are used on the truss legs are exposed to falling drinks on the dance floor and should be protected!
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
Wyświetl wariacje tego produktu
Thomann LED Par Rain Cover 35 XL
(17)
Thomann LED Par Rain Cover 35 XL

Rain protection hood for LED PARs With this rain protection hood you can secure your LED Pars against rain and other undesired liquids for example in clubs etc, This LED Par rain cover is simply...

Stairville LED Power & DMX Bar
(348)
Stairville LED Power & DMX Bar

T-Bar Truss For LED-PARs or other DMX spotlights, 5 Protective contact sockets on the front, 5 DMX outlets on the front, DMX in- and output on the front, Power Twist input on the side, Includes 4...

Thomann LED Par Rain Cover 25 L
(50)
Thomann LED Par Rain Cover 25 L

Rain protection hood for LED PARs With this rain protection hood you can secure your LED Pars against rain and other undesired liquids for example in clubs etc, This LED Par rain cover is simply...

Stairville Diffusion Filter for LED PAR
(506)
Stairville Diffusion Filter for LED PAR

Diffusion Filter New diffusion filter for LED PAR cans, By improving the light distribution and increasing the beam angle, glare (among other things) is reduced and colour transitions have a much...

Thomann Stage TRI LED Rain Cover 130
(6)
Thomann Stage TRI LED Rain Cover 130

Rain protection hood For the stage Tri LED Bundle, Eurolite KLS Series, Cameo, CLMPAR etc., With this rain protection hood you can secure your LED bar against rain and other undesired liquids for...

Thomann CLB LED Rain Cover 76
(3)
Thomann CLB LED Rain Cover 76

Rain protection hood for the CLB Compact LED Bar Set With this rain protection hood you can secure your LED Bar against rain and other undesired liquids for example in clubs etc, This LED Par rain...

24,90 € 106,67 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 15 €

Cena w PLN podana jest w celach orientacyjnych

Artykuł dostępny w magazynie
Artykuł dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki
Powiadom innych o tym produkcie
Twój asystent sprzedaży
gb
Tel: +49-9546-9223-45
Fax: +49-9546-9223-443
Poradniki online
Can Lights
Can Lights
The PAR can is usually the basis of an entertainment lighting system!
Poradniki online
LED Lighting
LED Lighting
LED PARs, LED Bars and Moving Heads - what should I bear in mind?
 
 
 
 
 
Podsumowanie:
* Ceny zawierają podatek VAT. Do ceny artykułu(ów) należy doliczyć koszty wysyłki. Oferty ważne do wyczerpania zapasów. Za błędy w opisie i innego rodzaju pomyłki nie ponosimy odpowiedzialności. CK=Cena katalogowa produktu
(9)
Ostatnio obejrzane
Behringer Pro-1

Analogue Synthesiser Dual VCO design based on CEM3340, Sawtooth and pulse waveform for VCO A, Sawtooth, Triangle and Pulse waveform for VCO B, Pulse Width Modulation, Noise generator, 24 dB low-pass filter with resonance, 2 ADSR envelopes for VCF...

Ostatnio obejrzane
Zoom A1X Four Acoustic FX Pedal

Multi-effect pedal For acoustic guitar, saxophone, trumpet, violin, harmonica, acoustic bass and much more, 50 Memory locations, 90 Effects, Includes 35 new effects specifically designed for acoustic instruments, Eight additional effects that let you control parameters such as volume,...

Ostatnio obejrzane
Yamaha THR10II

Modeling combo amp for electric guitar 5 Memory locations, Realistic tube amp sounds and feel, Effects, Bluetooth and USB, New amplifier models for electric guitar and bass, Microphone models for acoustics and flat voicings, 3 Amp modes per amp...

Ostatnio obejrzane
Harley Benton ST-20HSS SBK Standard Series

Electric guitar Body: Lime tree, Screwed neck: Maple, Fretboard: Amaranth, DOT fretboard inlays, Neck profile: Modern "C", Fretboard radius: 350 mm, Scale: 648 mm, Nut width: 42 mm, Double-action truss rod, 22 Frets, Pickups: 1 Humbucker (bridge) and 2...

Ostatnio obejrzane
Native Instruments Traktor S3

4-Channel DJ Controller and Audio Interface Sample Rate / Resolution: 24-Bit / 44.1 / 48 kHz, 2 Large 14 cm precision jog wheels, Illuminated jog-wheel rings for visual feedback, including deck selection, 16 RGB pads for triggering hot cues,...

Ostatnio obejrzane
Behringer Airplay Guitar ULG10

2.4 GHz Wireless System for Guitar 4 Channels, Plug & Play, Ultra-low latency of approx. 5 ms, Built-in 750 mAh lithium battery with up to 6.5 hours life, Maximum range: 30 m, Frequency response: 20-16,0000 Hz, Auto Sleep /...

Ostatnio obejrzane
Steinberg UR816C

16x16 USB 3.0 Audio Interface with iPad Connectivity 32-Bit integer / 192 kHz, 8 Class-A D-PRE mic preamp with +48 V phantom power, Latency-free DSP-assisted monitoring with REV-X Reverb, Channel Strip and Guitar Amp Classics - also included as...

Ostatnio obejrzane
Toontrack EZX Death Metal

Toontrack EZX Death Metal (ESD); expansion pack for Toontrack EZ Drummer 2 (item 399369) / Superior Drummer 3 (item 419735); produced and recorded by Mark Lewis at the Sonic Ranch in Tornillo / Texas; contains 2 complete drum sets, optimized...

Ostatnio obejrzane
Mackie ProFX12v3

12-Channel mixer 7 Microphone inputs with 3-band EQ, 4 Inserts and 4 one-button compressors, Channels 5-10 have microphone inputs and stereo line inputs, 1x 3.5 mm Stereo jack Line input, 2x4 USB Interface, Built-in GigFX effect unit with 24...

Ostatnio obejrzane
Teenage Engineering PO-137 rick & morty

Teenage Engineering PO-137 rick & morty; vocal synthesizer and sampler; integrated microphone for sampling; 120 seconds sampling time; 8 voice characters; 8 effects; parameter lock (2 parameters per sound); 16-step sequencer; 16 patterns; "Lock Tab" write protection for patterns; transpose...

Ostatnio obejrzane
Singular Sound Aeros Loop Studio

Singular Sound Aeros Loop Studio; Effects Pedal; 4.3" touch-enabled screen with color coded cues and waveforms; 6 parallel tracks and 6 song parts for a total of 36 distinct loops per song and in simultaneous parallel and sequential looping; Unlimited...

(2)
Ostatnio obejrzane
Universal Audio Apollo Twin X Duo

10 x 6 Thunderbolt 3 Audio Interface With UAD-2 DUO processor for almost latency-free recordings via plug-in emulations of classic compressors, EQs, tape machines, microphone preamps and guitar amplifiers, 24 Bit / 192 kHz AD / DA converter, 2...

Twoja opinia
Zgłoś błąd Zauważyles błąd i chciałbys nas o tym powiadomić?

Dziękujemy za Twoją wiadomość, zostanie ona przetworzona najszybciej jak to możliwe.