Sommer Cable S-M3 X12S-I Sysbox Screws

142

Sysbox Screw Set

  • With M3x 12 screws
  • Countersunk screws
  • Torx 10
  • For Sysboxx D series
  • Package quantity: 25 Pieces
Produkt dostępny od Listopad 2008
Numer artykułu 219787
Jednostka sprzedaży 1 szt.
Component type Screw Set
32 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 20.03.
1

142 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

42 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
F
Does the Job
FiddleKase 12.03.2020
I was disappointed that the algorithm didn't inform me I needed a nut, or some other threaded unit to secure them, even though I had included a rack panel and some neutrik connectors to attach using the screws.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
b
Perfect for securing your Neutrik Sockets to a Rack Plate.
benash 09.07.2018
So I purchased these as I wanted some decent quality screws that would work with the Neutrik sockets I buy fairly frequently. These really do the job perfectly. They're a great length, not to long, not to short.

I also like the added addition of the screw heads. They're not you conventional Philips or flat head screw type. Its like a star. This means you can only remove them if you have the right tools. Which I think is good as it stops any unwanted alterations.

They also work perfectly with the Neutrik MFD Mounting Aid!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
SC
Work as intended
Simon Cox 18.04.2018
In short they are screws and they do what they say. The tolerances are far superior to any you might find on "budget" websites. The black paint does NOT ware away as soon as you install it; which is very aesthetically pleasing, as well as the heads staying flush with the mount. You will need a Torx 10 screw driver bit, but these types of screw drivers are usually a must have for equipment repair and worth while picking up for your tool box. The only other thing you will need to make sure your nut or plate has an M3 mount for these to screw into.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
TS
Perfect
ToneArt Sound 06.12.2019
Perfect and very good quality - buy these and a couple of Neutrik MFD to mount any D-size plug on a rack ;)
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie