Sommer Cable Quantum Highflex Multipair 2

195

High Qualiy Multicore Cable

  • High quality 2-pair multicore
  • Suitable for live and studio purposes as well as permanent installations
  • Completely torsion-free
  • Cold-resistant up to -30°
  • Pairs of wires insulated individually with rubber sheath
  • Cu-coil shielded with 99% coverage
  • Low capacitance of 45 pF cable/cable
  • 110 Ohm (AES/EBU), compliant over hundreds of metres
  • Cable cross-section: 0.14 mm²
  • Sheath: S-PVC
  • AWG - AWG26
  • Conductor insulation: Skin PE
  • Shielding: Cu coil, paired
  • Coverage: 99%
  • Temperature range: -30° to 70°
  • Sheath colour: Black, matte
  • Capacitance cable/cable at 1 m: 45 pF
  • Capacitance cable/shield at 1 m: 90 pF
  • Conductor resistance at 1 km: < 90 Ohm
  • Insulation resistance at 1 km: >1 GOhm
  • Characteristic impedance: 110 Ohm
  • Outer diameter: 8.5 mm
Produkt dostępny od Grudzień 2006
Numer artykułu 108775
Jednostka sprzedaży 1 metry(ów)
Number of NF-channels 2
Screened Pair Yes
Colour Black
11 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Rabat ilościowy
Cena jednostkowa Oszczędzasz Ilość
11,00 zł 1
10,59 zł 3,7% 10
10,29 zł 6,5% 100
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 25.04.
1

195 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

71 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
Good multicore - a little overkill with 2 lines
Stephan7664 18.02.2014
This multicore cable is very flexible, has a thick, hard to cut but very soft outer jacket, and nice wires inside. It is, however a little big for a cable carrying two signals, as there are two fibre-fillers each as big as a sub-cable. The 4-pair version of this cable is just as thick. The wires besides the big outer jacket are easily stripped (I use a professional Stripax automatic wirestripper) and soldered.

My use of this cable was to connect a preamp to my DSLR Camera. The cable barely fit into a 5-pin XLR connector with the help of some tools to cut oof parts of the strain-relief inside the connector. I used an Amphenol 5 pin XLR, which is like the Neutrik XX series, but cheaper. For this cable, it was a mistake since the Amphenol's plastic for the strain relief is hard and brittle, and it was easy to break of too much. Neutricks strain relief is softer and not brittle at all, so next time I will spend the extra cash.

Mounting on the other side was using an industrial strain relief. For this cable you should use a trumpet, as the screw0type strain reliefs can create a sharp bend in this cable.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
JS
Awesome cable!
Johan SpinOff 28.12.2019
Very good cable for on-stage use! I love to have a couple of 2-pair and 4-pair XLR cables around for feeding in-ear monitors, going from the DI's of the keyboard to the stage block, ... It drastically reduces the amount of separate cables on the stage. It just looks neater, works faster, ...

Pros: Good quality, Easy to solder

Cons (sort off...): It's rather expensive, but totally worth it!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Good for Studio Applications, Maybe not so much for Live Applications
BlackSpire 26.10.2021
I use the cable for custom length stereo audio connections in my studio.
The two cores are extremly well padded and will resist people walking over it pretty well (I still wouldn't recommend running it through a walk way).
While it might be overly thick and a bit expensive, I like buying cables that last for a life time, which this cable does so far.
Thanks to the padding, this cable will also last long in a live setup, but due to its thickness it can get cumbersome to handle at certain lengths.
Also there is something to be said for not using expensive cables in live setups, since event the best cables won't survive an idiot tying a knot in it.

Note: be careful when removing the outermost coating layer as the next layer is the individual core coating, which you don't want to cut open.
The individually coated cores are thick enough to work with the strain releave of neutrik connectors.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
m
muflonski 04.03.2019
This one was a bit of a letdown for me. For a two pair cable composed of really thin individual lines, the cable as a whole is really thick with a lot of filler inside. Coiling is kind of clumsy because of that. Either thinner overall cable diameter or thicker individual strands would feel much better. But it is usable and so far it works as it should.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie