SKB CV8 Cymbal Case

141

Cymbal case for up to 6 cymbals with centre post

  • Suitable for cymbals up to 22"
  • The "Cymbal Vault" from SKB
  • Moulded case made from polyethylene
  • Transports without putting any pressure on the cymbals
  • Very stable
  • Welded centre post for up to 7 or more traditionally shaped cymbals
  • Complete with 4 cymbal pads
  • Diameter: 58.42 cm
  • Weight: 6 kg
  • Lifetime manufacturer warranty covering material breakage
Numer artykułu 101112
Jednostka sprzedaży 1 szt.
Type Case
Max. Cymbal Size 22"
Max. Number Of Cymbals 7
Outside Pockets No
Multi Layer Yes
Colour Black
798 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 17.04.
1

141 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

wykończenie

79 Opinie

A
Case godny polecenia
Anonimowy 18.10.2016
Produkt wykonany solidnie. Jest wytrzymaly i odporny na uderzenia lub upadki. W case'ie talerze sa dobrze zabezpieczone, jeyeli je dobrze skrecimy sruba, nie maja prawa wypasc, ani sie poruszac podczas transportu. Polecam
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
KA
Excellent cymbal case
Keen Amateur 11.02.2020
This case demonstrates excellent quality in both materials and methods of construction, though I have two minor notes to make on design.
Pros:
- Excellent centre post construction. The post is welded to a strong, wide base plate that is riveted through the plastic case from the outside, securing the closure strap with two of the four rivets. Inside the post is well covered with a strong plastic sleeve and has a chunky, plastic-covered nut to keep cymbals secure
- Very good quality, thick cymbal dividers and felts included for maximum cymbal protection
- 4-5mm thick polymer shell, excellently moulded for strength and durability
- Lifetime manufacturer guarantee for original owner.
- Well placed heavy-duty foam padding in the right places inside

Cons:
- Not really a con, just something to be careful off - the handle is moulded to the 'lid' of the case, not the part with the cymbal post. Always unclip the strap with the case on a table or floor so that you don't find yourself holding only a lid!
- both the main case and the 'lid' have two feet moulded into them so that the case can stand upright on four feet. I find that when the lid is secured, it actually creeps over the feet of the main case, leaving it unbalanced when upright.
montaż
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
MK
Great buddy on tour
Matti Koivu 11.12.2019
Took this for intense touring life
Vans, airport trolleys, planes. It has suffered it all.
Keeps the cymbals tight in place
Only, it;s quite heavy if you have to carry it for some reason
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
d
Hard, compact and light
davidesca 26.03.2022
My title says it all. Your cymblas feel safe thanks to the hardness of the casing, without too much added weight and a very compact size that fits in any corner.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie