Rockboard S-Connector nickel

354

Straight Pedal Connector

  • Length (plug to plug): 12 mm
  • Allows for the shortest possible connection of two pedals
  • For pedals with side-mounted sockets
  • Suitable for pedals with side panels at a 90° angle to the floor
  • 6.3 mm Mono jack socket on both sides
Produkt dostępny od Luty 2017
Numer artykułu 404982
Jednostka sprzedaży 1 szt.
Length 1,2 cm
Colour Silver
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Connector from 6,3mm TS Jack
Plug out Jack 6,3mm TS male
Pokaż więcej
8,40 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 25.04.
1

354 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

171 Opinie

B
Rockboard S-Connector
Bosman 03.05.2019
Niezły łącznik.

Za: Do jakości wykonania nie mam zastrzeżeń. Transmisja sygnału nienaganna.

Wątpliwości: Na dłuższą metę umiarkowanie użyteczny. Nawet kostki tego samego producenta i tak się odrobinę różnią i trudno je dobrze połączyć na sztywno. Osobiście ich więcej nie kupię.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

D
Dejw 18.12.2022
Very good connectors, the only issue is that if you use effect pedals from various brands not always you have the input / output sockets on the same height. In my case with having majority of the pedalboard with EHX and tc electronic products, all suits perfectly!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

D
Stimmt nicht mit allen Effekten überein
Deejaynir 20.12.2022
Solide schön unterbricht nicht
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
b
Don't buy this style of connector.
benash 13.10.2018
Ive recently been building a pedal board for the function band shows I do. I own couple of Boss Pedals and have been trying to find a way to take up as little space as possible on my board. Usually this style of connector wouldn't be possible, but as I am using the same company pedals, the jack sockets line up perfectly... or so I thought.
I plugged two pedals in, and they seemed to work perfectly. So I wired everything up and took them on a gig. Cut a long story short, everytime I hit either of the pedals, there was a weird crackling sound. So after the gig the next morning I ran a few tests. Basically even though the Boss pedals appear to have the jack socket in exactly the same place, they're ever so slightly different. So whenever I pushed on one pedal, It would act as though I was pressing down on the jack socket on the other, therefore creating the noise.
Its a shame as these connectors are cheap, and small. As an alternative, I recommend "Rockboard" or 'EBS" patch leads. Thomann sell both. No noise, and equally as compact.
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie