Rockboard Pedalboard w. Gig Bag TRES 3.2

12

Pedalboard for Effects Devices

  • For approx. 7 to 12 effects pedals (depending on size)
  • Torsion-resistant, lightweight aluminium construction
  • Slot design for easy pedal attachment
  • Mounting holes on both sides for RockBoard LED Light (not included)
  • Made from 1 cold-rolled aluminium sheet
  • Additional stiffening via U-shaped support strut
  • Completely flat, 10° angled board surface - no welds
  • Slot for RockBoard Module Patchbays
  • Robust black powder-coated surface
  • Dimensions (W x D x H): 598 x 234 x 37 - 71 mm including rubber feet
  • Weight: 1.3 kg
  • Includes self-adhesive hook tape (50 mm wide) and loop tape (25 mm wide) and cable ties

Includes gigbag:

  • Internal dimensions (W x D x H): 650 x 260 x 120 mm
  • Weight: approx. 1.6 kg

Note: Register your product at https://shop.warwick.de/en/warrantyregistration to extend the warranty to 4 years.

Informacja Zarejestruj swój produkt na www.w-distribution.de/Warranty i przedłuż gwarancję na 4 lata.
Produkt dostępny od Luty 2020
Numer artykułu 478619
Ranking sprzedaży 1 szt.
Number Of Effects 12
Incl. power supply No
Effect Send/Return No
Incl. Gigbag Yes
Incl. Case No
122 € 572,71 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 9,90 €
Cena w zł podana jest w celach orientacyjnych
Dostępny w magazynie
Dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 6.07.
1
google translate gb
Wystąpił błąd. Proszę spróbować później.
L
A little more work for R&D dept.
Lechum 01.10.2020
I received this product a couple of days ago. Quality is good, however there are a couple of negative points to raise. First, I was very disappointed to find that my Harley Benton PowerPlant (Thomann item 119603) was too deep to fit underneath the unit. Looking at the dimensions of alternative power supplies for pedals, it seems that only those with a separate transformer will go under the unit. This makes the 3-pin plug/socket on the various Rockboard MOD connection organizers of no use. Perhaps Thomann should put on the product details for the power packs which Pedalboards they are compatible with. End result is that I had to get another power supply.
I contacted Rockboard direct, and they were very understanding, and said that the larger pedalboards that can hold 2 or more rows of pedals can accommodate large power supply units underneath, because the height from the ground increases accordingly. They also told me that ALL of the 1/4 inch jack connectors on the MOD 1 are STEREO, so for example, you can put a twin button amp footswitch through it, thus making everything much neater.
Secondly, the two pre-drilled holes on the board to accept the MOD 1 are not big enough to take the attachment bolts! So I had to make them larger; these holes are too close to the additional supports, so it is very a awkward job to attach the MOD 1. After a half-day's work I manged to get it all sorted, and the unit houses my pedals firmly and attractively. It looks professional, but in my opinion is a bit overpriced.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Good first pedalboard upgrade
T.J. 14.02.2021
Since I've been buying some extra pedals, my former pedaltrain nano+ became a bit small to fit everything.
I was therefore looking for a knew solution, with a bit more space, but no overkill, to end up with a lot of open space on the knew one.
For me the TRES 3.2 seems the correct size for my current needs.
I chose Rockboard over Pedaltrain this time, since it appeared to be easier to hide cables, due to the fact that there are more rows of smaller holes. Especially good, since every pedal has its own positioning of connections.
You can fit two rows of pedals on top of each other, but only if you only own pedals that have "normal" dimensions. (For example, I have a TC Electronics Fangs and these are too big to fit two of this on top of each other).
In depth it could have been a bit longer for me, it would create a bit more space in between two pedals, but the QUAD, comes in with too much extra I think.
With the pedals close to each other, especially if you place a higher model on the first row, you hit it, when switching on a pedal of row two.
BUT it gave me the idea of actually keeping my Nano+ pedal. I fitted this with velcro as a higher second row, like you see with the big, expensive pedalboards. In this way the second row is a bit higher and you can switch the pedals on and off without problem.
I can fit 10 normal sized pedals on the board on the width of the Nano, so this gives mee two rows of 10 normal sized pedals. Next to this there is enough space to fit an expression pedal, since the TRES 3.2 and the Nano have different widths.
Further on, the Rockboard have many possible options, such as the tray, the patch bays, etcetera.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
OM
Robustes Profi Ausrüstung
Ozi Mike 30.04.2020
Sehr stabiles Verarbeitung das Pedalboard selbst, die mitgelieferte Tasche scheint auch recht gut verarbeitet zu sein. Flexibles Layout also es passt eine Power Block darunter und in Kombination mit die Rockboard Mod's wird das wirklich zu eine Profi teil.
montaż
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie