Rockboard Flat MIDI Cable 30cm Black

123

Flat MIDI Cable with Rectangular Profile

  • Compact and super-flat angled plugs
  • Flexible copper conductor 5 x 7 x 0.12 mm
  • Suitable for use with clock/SYNC functionality & phantom power
  • Max. nominal current 1A
  • PVC external insulation
  • Angled DIN 5 pin plug
  • Operating temperatures: -20°C to +60°C
  • External dimensions of cable (W x H): 6.5 x 3.5 mm (rectangular)
  • External plug dimensions (L x W x H): 33 x 15 x 10 mm (1 5/16" x 9/16" x 3/8")
  • Length: 30 cm / 11 13/16"
  • Colour: Black
Produkt dostępny od Grudzień 2017
Numer artykułu 426454
Jednostka sprzedaży 1 szt.
Colour Black
Length 0,3 m
Connector from DIN 5-pin (MIDI) male
Connector from DIN 5-pin (MIDI) male
Plug out DIN 5-pin (MIDI) male
15,90 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 25.04.
1

123 Oceny klientów

4.2 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

65 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
BD
Great concept, poor realisation
Black Dog Bob 15.04.2019
I needed to connect four devices on my guitar FX pedal board via MIDI. Space was at a premium, and I wanted all the power, audio and MIDI cabling to be tidily out of sight underneath the board.
I thought I'd found the perfect solution when I came across these right-angled MIDI connectors - with very flat profile plugs enabling the cable to drop straight down from the devices, taking up no valuable space.
I would have thought this sort of application was exactly what this product was intended for.
In which case, why on Earth have the pins been put at exactly the angle that renders the product useless for this purpose?!
MIDI ports on devices are always closely grouped. The five pin holes are always at the bottom or top of the port. The pins on this product are placed such that the flat section of the plug lies parallel to the device, rather than perpendicular. This inevitably means that it lies across, and blocks, the adjacent MIDI port.
This is a fundamental design flaw, in my opinion - I really can't see a use for this product in its current format.
The product is well-made, but if you need to use more than one MIDI port on your device, give this one a swerve.
wykończenie
18
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
SJ
Garbage
Sahil Jagtiani 15.07.2021
Major design flaw with these things. Cannot stack two together (MIDI In & Out) and can't use it on my pedalboard between my digital MIDI enabled pedals. What a total waste of money. Highly disappointed!!!!
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
j
Good quality, flat cable. Look closely at the cable angle!
jkt 23.02.2018
All in all, it's quite a great cable. Flat and unobtrusive, and can potentially help you save a lot of space. The only downside (and this is a significant one for me) is one that I didn't notice when first ordering them:

When plugged into most MIDI keyboards, the cable itself is angled 90 degrees left or right, not up or down. This means that if you have any other jacks or plugs immediately to the left or right of your MIDI ports, they will potentially be rendered unusable by this cable.

If you have plenty of space to the left and right of your MIDI ports, this shouldn't be an issue for you.

If Rockboard could make other versions of this with the cables angled differently, I would be much more likely to buy more.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
g
Good idea but not very universal use case
gcgc 11.10.2018
It would be great if Rockboard would have a variation of this cable with different angles on the connector - otherwise it depends on a specific arrangement of your gear and you need to make sure your gear has midi ports angled in the best angle for these cables to fit well and not cover other ports or stick out. The connectors do not bend easily so it is futile to simply bend them into the correct angle.
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie