pro snake MC 1622

154

Multicore Cable

  • Length: 30 m
  • Connectors: 16 In, 2 return XLR (NF), 2 return Speaker Twist
  • With integrated loudspeaker cable, ideal for powered mixers
  • External diameter: 20 mm
  • Speaker cable cross section: 1.0 mm²
  • Signal cable cross section: 0.16 mm²
  • Housing dimensions (L x W x H): 293 x 186 x 65 mm
Produkt dostępny od Luty 2011
Numer artykułu 257257
Jednostka sprzedaży 1 szt.
Length In cm 30,00 m
Input 16
Returns 2
Snake Yes
Stagebox Yes
Cable Drum No
Multipin Connector No
Dostępny B-Stock od 845 zł
933 zł
darmowa wysyłka, zawiera podatek VAT.
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 17.04.
1

154 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

montaż

73 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
r
Pro Snake MC 1622
ronhow 18.08.2018
Other reviewers have pretty much said it all but nevertheless read on. This is an exceptional piece of high quality equipment, especially at the price; believe me there is nothing else in this price range that includes speaker sends. This snake is very well built and the stage box is actually compact. The only con is that the cable is very long and heavy and, takes a whole suitcase of its own to cart around, but what do you expect? Its best use would be for the Behringer PMP 3000, 4000 and 6000 range of powered mixing desks, which have 8-12 XLR inputs, jack monitor and Speakon twist outputs. The jack return connectors typically run to male outs on the stage box and you can use XLR ? XLR or XLR - jack mic leads for powered monitors meaning that you can have one multicore running to the stage from 30m (100 feet) away. With an 8 input desk you?ll have the ability to, for example, run 4 mics, 4 DI?s, a 5 piece drum mic set-up using a drum mixer at the desk and still have 3 spare channels for keyboards with either spare DI?s or mic leads by using XLR - jack converters at either end if necessary. Or, you could utilise those for spare returns to additional speakers from the main outputs. So, the pro?s and variables are endless. Don?t be tempted to convert any of the stage box inputs to jack, as some have done. And, don?t be tempted to shorten the mulitcore as you have enough length to run the cable overhead from post ? post in, for example, an outdoor pedestrian area set-up. By the way, I bundled the fan end cables into groups of four with cable ties and colour coded them with electrical tape ... well, 12-16 are grouped for the drum kit.
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
K
Heavy but good
Korneel 30.12.2019
I have carried this multisnake for 5 years before going completely digital between stage and listening room. Nothing has broken, never had any noise or interference issues. Very good quality for the price. I still carry it as a backup for when digital would fail, or when I have larger distances on stage to cover. The multicore is very thick, so beware of people falling over it, and the whole is very heavy, making it difficult to wrap -- but completely worth it for me.
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
Great overall but has potential fundamental flawed
LukeGreaves 07.12.2022
Bought as my current multicore was only 8 channels and I needed the extra capacity. I’m more than happy with its sound performance and general build quality but it has a flaw that could stop setting up a show in its tracks. The first time I used it half the numbers had come off the tails before it made it out the van. This meant I had to spend precious time tracing those channels, time I didn’t really have. I’ve since labelled them all again and I’ve used it a number of times now with no other problems. My advice if you’re thinking of buying one is sure, go right ahead it’s great but the first thing you MUST do is label the tails properly!! Don’t get caught out like I did with a 12 piece band waiting to sound check and the clock ticking on a road closure!
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Q
Fine product for the money
Q-AV 26.02.2019
Cable is just fine; foiled.
The connectors are cheap, not even close to Neutrik, but for non-road work just fine. If you want better connectors and chassis-parts everything is soldered, not on a print, so with a little time you can make it Neutrik Branded :)
The 1mm2 Speakon wires.. a little to thin IMO. should have been minimum 1,5 mm or even better 2,5 mm.

Overall: for the price a nice piece of work, but do not expect to live very long on stage!

I use it for a fixed install on a school and if any chassis part brake down; i'll just replace it with a Neutrik :)
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie