Rean NYS SPCR 1

43

Insert Module

  • For Neutrik NYS-SPP-L1
  • With stereo jack / 2x mono jack
  • For using in place of standard patch modules
  • From Neutrik (Rean)
Produkt dostępny od Luty 2008
Numer artykułu 139543
Jednostka sprzedaży 1 szt.
7,30 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Czwartek, 4.04. and Piątek, 5.04.
1

43 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

wykończenie

21 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Extremely useful
Andrew551 24.09.2015
When using an insert as a direct out from a mixer, or splitting an insert to the input and output of a compressor, this little board does the business.

It is designed for tip send ring return. If the red connector is not used then the tip is connected to the external device and also to the ring (the return).

The split side uses TS sockets and needs TS (not TRS) patch cables.

Very high quality - I've never seen a bad connection with Neutrik/Rean patch bays.

What would be even more wonderful would be:
- a version for Ring send Tip return
- to be able to use TRS cables after the split; i.e. TRS sockets with R and S joined.
- a daisy chain feature to have more than one outboard chained in series; making use of the current blank socket.
obsługa
właściwości
wykończenie
5
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Simple solution for bringing insert points to patch bay
Janice 23.08.2020
I use these in the corresponding NYS patchbays to bring in insert send/ returns from TRS sockets and have them as TS send/returns on the front panel. Great space saving solution, no need to make Y leads or other such faffing about. A lttle bit fiddly to fit but no real drama. It took a couple of minutes to do half a dozen of them. A bonus point is that the standard channel cards they replace can be kept as spares.

I'd buy again should the need arise.
obsługa
właściwości
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
GS
Very Handy
GMTech Solutions 09.09.2020
I'm using these modules in a radio studio, where all mic's are connected on the insert busses from my A&H mixer. From there they are feeding trough a multi cable these modules. They split the signals in a send/ return, only one thing you have to do, patch these to your gear and you're good. No additional insert cables. Great modules for the NYS patchbays. And cheap.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
N
If this is what you are looking for - it is perfect.
NIELSIR 03.12.2020
Great price, well built.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie