I use these to connect cables into and out of my pedal board and they work great. They're stereo, but work just fine with mono instrument cables. For soldering, the tags are small, but they are spaced far apart and you have lots of space, so it's easy. The mechanism for securing the cable and strain relief is excellent, and the rubber bushing on the end stretches over large diameter cables so you probably won't need to trim it.
Only negative is that the locking mechanism doesn't hold the jack as firmly as you might expect - it gives a little when you pull on it. It is secure enough to do the job though.
This Jack is without competition. It has the typical Neutrik-style screw-in strain relief and jacket known from their X-series connectors, but with one important difference. The connector part is held in place with a screw, so you first untighten the jacket, then remove the screw and slide it out the front. The connection is solid, although there is a little bit of wiggle-room for the plug when fully inserted.
* Ceny zawierają podatek VAT. Do ceny artykułu(ów) należy doliczyć koszty wysyłki. Oferty ważne do wyczerpania zapasów. Za błędy w opisie i innego rodzaju pomyłki nie ponosimy odpowiedzialności. CK=Cena katalogowa produktu