Mojotone T Standard Solderless Harness

20

Pre-Wired Electronics Replacement Kit for Electric Guitar

  • For T-Style models
  • Pre-wired electronics kit with the highest quality components, providing a significant improvement over standard electronics
  • Solderless plug-in wire connector for quick installation and easy pickup changing
  • The treble bleed circuit prevents treble loss when the volume control is turned down
  • For: 2 single-coil pickups with 1 volume, 1 tone and standard 3-way switch
  • Switch positions: 1: bridge, 2: bridge & neck, 3: neck
  • Made in USA

Delivery contents:

  • 2x Mojotone Custom CTS 250k solid shaft potentiometer (6.5 mm thread length)
  • CRL 3-Way switch
  • Switchcraft mono input jack
  • .047µf capacitor
Produkt dostępny od Czerwiec 2021
Numer artykułu 515807
Jednostka sprzedaży 1 szt.
Design Normal
Resistance Value 250 kOhms
Characteristic Curve Logarithmic
Thread Length 9,5 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type Smooth
Type Switcher
Colour Silver
Pokaż więcej
499 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 20.03.
1

20 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

18 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Very good
JohnnyCk 02.10.2023
I bought this for my squire classic vibes custom ( made in china ) telecaster. I had problems with my control plate and decided to change out the whole plate plus install texas special pickups. The whole installation was simple. 6 slots . 1 hot and one ground wire from your neck / bridge pick up and your jack connects into the new switch. I had to get new American sized knobs for the tone and volume pot . Only negative is there isn't much resistance in the pots . They move around too easily for my liking . Only negative
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
s
zeer goed
sjaaki 28.11.2023
tis een verschil in toon ben verast van die upgrade zal er nog bestelen voor mijn andere gitaren
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate fr
Wystąpił błąd. Proszę spróbować później.
AL
Parfait !
Aurelien L. 08.06.2022
Monté sur une Squier Affinity pour un projet de modification complet (micros, électronique, manche, chevalet, bref, complet !) aucun soucis, ça rentre parfaitement et rien de plus simple à cabler : il suffit d'un objet avec un pan plat (tournevis, couteau suisse ou n'importe quel objet de dépannage peut faire l'affaire) pour les fils principaux et d'un petit cruciforme pour la masse du chevalet.

En 10 minutes montre en main et sans fer à souder, vous avez une Telecaster parfaitement câblée sans problème de masse ou autre.

Simple, rapide, sans don de bricolage exigé... je le redis : PAR-FAIT !
wykończenie
5
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
S
Naja ...
Stonepat 21.01.2022
Zunächst muss man ein wenig darauf achten, ob die Bohrungen für die Potis passen, da es sich hierbei um amerikanische Potis handelt, die dicker sind, als die schmalen asiatischen Pendants!

Die Klemme, mit der man die Kabel (statt Löten) einklemmt, ist auch erstmal gewöhnungsbedürftig, aber Vorkenntnisse bzgl. Gitarrenverkabelung sind aufgrund der einfach verständlichen Anleitung nicht nötig. Die Verkabelung geht dann schnell von der Hand. Hat man alles richtig gemacht, dann klingt alles tadellos.

Warum zwei Sterne Abzug: zum einen war bei mir eine Lötstelle am 3-Way-Switch schon bei Lieferung ab (konnte ich wieder dranlöten, aber eigentlich kauft man so ein Set ja, um Löten zu vermeiden und der Preis ist ja auch nicht ohne). Zum anderen empfinde ich die Gängigkeit der Potis einfach als zu leicht. Ich finde das einfach haptisch nicht schön, wenn die Potis sich zu leicht drehen lassen, das wirkt billig (obwohl die Potis tadellos funktionieren).
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie