Millenium KS-2000

425

Keyboard Stand

  • Height adjustable
  • Maximum load capacity: 80 kg
  • Weight. 8.9 kg

Dimensions:

  • Width: 710 mm - 1020 mm
  • Depth: 320 mm
  • Height: 620 mm - 790 mm
Produkt dostępny od Marzec 2013
Numer artykułu 292267
Jednostka sprzedaży 1 szt.
Keyboard Supports 1
344 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 19.04.
1

425 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

260 Opinie

MD
Stable and straightforward
Mateusz Dz. 10.09.2021
This stand is all you need for a stage piano. I am happy with my purchase.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

R
Świetny statyw godny polecenia
RavP 11.08.2023
łatwy w obsłudze, solidny, regulowany, pasuje na stage piano. Czego więcej chcieć? Jedynym drobnym minusem są plastikowe uchwyty wkrętów, które potrafią przyjechać ukruszone, lecz wciąż sprawne.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

U
Studio/scena
Usser 15.11.2019
Dobrze wykonany, łatwy w obsłudze i stabilny statyw
stabilność
wykończenie
montaż
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
K
It is great. a minimal design flaw, no brainer
Krausz 31.08.2015
It is sturdy, stable, and can hold perfectly a Studiologic SL990 of 20 kg. The height is just fine, in the minimum position where one can block the legs with the 4 screws this way comes on 75 cm from the ground level to the keys top in my case. If you do not use those 4 screws, you can lower an additional 3 cm. Anyway lower than an actual piano, so unless your keyboard is not particularly huge [in height], you can have a comfortable hight setting.
The only issue are those screws which hold together the extension of the two lateral parts. Those are disposed "looking" downwards at almost the middle of the stand. And in my case, I repeatedly hit my kneecap in them each time I sit down to play. One solution would be to throw away one screw, and the stand is stable, because the other screw holds the distal tube. Another solution would be to throw away the above mentioned screw and get a power drill, and drill a horizontal hole through the external quadratic tube and the internal inox tube, and put a regular screwer holding everything together. Obviously who designed this stand was somebody who never played any keyboard on the prototype or was a short person, or used a higher position of the stand. A suggestion [for the designer] would be to place those 2 screws in horizontal, facing each other, and not downwards. This way it doesn't bother anyone's knee [who is tall], and also much easier to put together.
stabilność
wykończenie
montaż
11
0
Zgłoś nadużycie

Zgłoś nadużycie