LP 592A-X Mic Claw with Z-Rod

153

Microholder with Z-Rod

  • With sound attenuation
  • Length L-piece: 27 cm
  • 5/8 "thread
Produkt dostępny od Czerwiec 2015
Numer artykułu 361615
Jednostka sprzedaży 1 szt.
Component type Drum Microphone Mount
245 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 20.03.
1

153 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

stabilność

wykończenie

74 Opinie

JW
Idealnie sprawdza się na ciasnych scenach
Jasiek Wronski 31.05.2023
Uchwyt do mikrofonu LP Mic Claw w udany sposób zastępuje statyw mikrofonowy. Dobrze spełnia swoje zadanie. Jest on szczególnie nieoceniony w sytuacjach, gdzie każdy centymetr kwadratowy powierzchni sceny jest cenny i nie można sobie pozwolić na ustawienie zbyt wielu statywów. Oczywiście można zamontować go na różnego rodzaju instrumentach perkusyjnych - bongosach, congach, werblach, tomach, centralach, ale w ekstremalnych sytuacjach można wykorzystać również innego rodzaju powierzchnie (stoły, blaty, boczki obudowy wzmacniacza gitarowego etc.). Minusem są niestety gumki, które mają za zadanie tłumić niepożądane wibracje instrumentu, do którego przyczepiony jest uchwyt, a dokładnie klej użyty do ich mocowania do klemy. Jest on mało trwały - gumki, mimo że same w sobie spełniają swoją funkcję, szybko odpadają i giną w najmniej spodziewanych okolicznościach. Jednak mimo tego małego mankamentu bardzo polecam uchwyty - posiadam 4 i jestem z nich zadowolony :)
wykończenie
stabilność
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
TM
Buy as many as you can fit in the peli
Theodore Miller 09.09.2019
Just bought my 3rd 4th and 5th. These things can get you out of a lot of sticky situations, but most importantly they've allowed me to eliminate all stands on the drum kit. With these, pluss a couple a56d's i can have a full 12 channel drum patch with no stands needed.
This is great for quick turnarounds as a touring engineer as the kit just has to be set up, and all mics are already pre clamped perfectly in place, just plug and go. Then when the show is over, just pull all cables and the kit can get lifted off.
Also useful in weird situations, need to get two cats over the stage access with no cable ramp? Clamp them up high and use them as 'hooks', taping the cables onto them.
The price has gone up by £10 since i bought the first two. Not a deal breaker but not ideal.

Overall id suggest investing in a pair, You'll love what they allow you to do.
wykończenie
stabilność
montaż
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
BB
I use it for kick
Branimir Bozak 13.11.2018
Excellent mic claw for congas, or - if you are like me - for kick.
Too bad there is no version with a flat clamp, this way I have to protect the kick drum hoop with layers of gaff tape before I hook up the LP claw - since it has a profile suited for conga rims.

Threads are good, screws too, will hold place during the gig, no problem!
wykończenie
stabilność
montaż
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Versatile, strong and stable
BernieW 03.11.2022
This is a really well made unit, all the parts are machined accurately so the moving parts won't jam and it always works as it should. The Z-bar stays in the position you set and never sags. It can grip the rims of a drum or the rod of a cymbal stand, however I believe if the claw was re-designed it could attach to the thicker base of a stand, for cymbals, snare, hi-hats etc. This is its limitation. Also, when used this way it can sometimes slip around the rod, even if knurled. A rougher finish would help. But the other similar mounts I have tried also have this problem. This is minor though and the Claw fits onto all sorts of things, such as the tuning lugs of congas, even kick drum legs. You can set it at any reach and angle and it is strong enough to stay there, so long as the place you mount it is strong enough. Despite the minor limitations it's still an extremely useful tool and has been a classic for decades, for good reasons. The current model has been improved. It's the best mount on a snare or tom tom rim for SM57's, M201's or mics of similar size and weight. Great stability and strength, always reliable. I take mine to every gig
wykończenie
stabilność
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat