K&M 23510 Microphone Bar

218

Extension Rail

  • Flexible extension rail for microphone stands
  • 2 Movable arms for positioning the microphones for individual settings
  • Equipped with nondetachable thumbscrews
  • Can be fixed to all standard microphone tripods with 3/8" thread connector
  • Length: 217 mm
  • Weight: 0.16 kg
Numer artykułu 124590
Jednostka sprzedaży 1 szt.
68 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 25.04.
1

218 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

58 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
H
good stereobar for the money
HowieCapowie 23.04.2019
I was looking for a cheaper additional stereobar and bought this. Does what it is supposed to. I also plan to use it to mic toms and save on mic stands. Think it will be perfect for that since you can change the distance (and hence angle of the two side bars) to bring the mics closer in on the source, and have the correct angle that needs to be set... I also have the røde stereobar which cost a bit more. That one is great with all the pre made meassurements and angle for correct stereo mic techniques. This one doesnt have that but it can do the same job for less, but you have to meassure and/or eyeball the correct angles. Which is not a big problem anyway.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
Slightly awkward fitting...
SiWatts 16.01.2014
The central section is threaded for a 3/8 microphone boom arm. Nothing wrong with that, but when mating up to a K&M stand the knurled grip ring doesn't fit between the two side arms. Whether it is intended that the grip nut not be used is unclear as there are no specific instructions.

Otherwise, well made (as with all K&M) and a good finish.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Does what you want it to do.
Anonimowy 11.08.2014
I used it during a tour to have two different mics on the same mic stand.
It does work well. You end up moving the whole thing around quite.
Once you found the position you like I suggest you tighten it a lot so it doesn't move anymore.
Very Good overall quality
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
MH
Good, Solid, versatile.
Mat H. 20.11.2020
Well made and sturdy. Does exactly what I need it to do.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie