K&K Big Shot

24

Single Piezo Pickup

  • Developed for larger instruments with low mechanical resonance
  • Pickup diameter: 3/4"
  • Height: 1/32"
  • Impedance: High ohmic
  • Large mono jack
Produkt dostępny od Sierpień 2013
Numer artykułu 317263
Jednostka sprzedaży 1 szt.
instrument type Universal
Active No
Passive Yes
Incl. Preamp No
Pickup System Piezo
Output Jack
Pokaż więcej
170 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 30.03.
1

24 Oceny klientów

4.3 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

dźwięk

wykończenie

9 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Jt
Amplify anything
Jake the snake 09.09.2017
I used this for the rondalla ensemble in my school. The pick ups were installed in all the instruments in the rondalla; including the double bass, bandurria, laud, octavina, cajon, and guitar. It worked out quite well in concerts and performances held in the school gymnasium and in any other venue. The pick-ups are easy to install. All the pick-ups I ordered worked perfectly. If I were to amplify more instruments in school, I would buy this again.
dźwięk
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
Ha
Unproblematischer Einbau
Hermann aus H. 01.11.2013
Passiver Kontakttonabnehmer, der mit passabler Klangqualität überträgt.
Unkomplizierter Einbau, man muß jedoch etwas ausprobieren um einen guten spot für die Plazierung des TA zu finden (geht aber aufgrund der mitgelieferten Klebemasse sehr gut).

Fazit: Kein High-end-teilchen aber Preis-Leistung gut
dźwięk
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate it
Wystąpił błąd. Proszę spróbować później.
A
Piezo per strumenti a bassa risonanza meccanica.
Anonimowy 29.12.2016
Lo uso su una ghironda in accoppiata con il Pure Preamp sempre della K&K. Consiglio di usare un cavo a bassa capacità per ridurre la perdita di segnale. È indispensabile fare delle prove e trovare il punto esatto sulla tavola armonica dove il pickup suona meglio prima di procedere al fissaggio definitivo con il nastro biadesivo. Molto pratico il supporto del jack. Se non volete avere del cavetto in eccedenza tra la pastiglia e il jack potete pazientemente infilarlo nel jack come ho fatto io, lasciando fuori solo la lunghezza desiderata. La resa sonora è, a mio avviso, perfetta, facendomi preferire il piezo ad un microfono a condensatore piccolo (tipo per strumenti a fiato). Non ho riscontrato alcun problema di feedback. Contrariamente a quanto consigliato sul sito della K&K trovo che il Big Shot sia più adatto alla ghironda rispetto alla versione più piccola che meglio si adatta a strumenti con maggiore risonanza della tavola armonica (chitarra o violino).
dźwięk
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate se
Wystąpił błąd. Proszę spróbować później.
M
Perfect for my bass guitar, but not in the recommended place
MacCaferri 08.12.2017
I ordered a K&K Big Shot pickup for my DIY hollowbody fretless bass . A couple of days ago I got it from Thomann and started to test it in various locations.
The manual recommends placing the pickup close to the bridge.
After a lot of fiddling with double-backed tape all I got was low output or terrible feedback and a harsh, trebly tone. Then I tried wedging it under the bridge (floating wood bridge), with a piece of thin felt.
WOW! Now its both loud, as loud as the Hofner-style pickup in the neck position and sounds lovely. Now I even wonder if I really need a magnetic PU at all, but there is already a hole in the top...
If I hadn?t been possible to fit the pickup in this way, I would have had to get a preamp to boost the signal, otherwise it would be useless.
For my purposes it would have been better with an ordinary output jack
that could be permanently installed in the body of the bass, but I understand why a multi-purpose PU like this one has a one-piece molded jack.
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie