Jaspers 4R-120B

Keyboard Stand with Lockable Wheels

  • For 4 keyboards
  • Material: Black anodised aluminium
  • Height: 140 cm
  • Width: 130 cm
  • Inner width: 120 cm
  • Depth: 50 cm
  • With hand wheels
  • With memory clamps for the upper supports
  • The lower support, reinforced with a second tube, has a pair of 60 cm support arms and is also suitable for particularly heavy keyboards
  • Other holders are 40 cm long
  • All supports are adjustable in height and inclination
  • Maximum load: Lower support up to 40 kg, upper supports up to 15 kg
  • Colour: Black
  • Made in Germany
  • Further compatible optional accessories (not included): Further support arm pairs, support reinforcements, monitor holder, microphone boom, sheet music stand, laptop holder

Dalsze informacje

Keyboard Supports 4

Tak wybrali inni klienci

Klienci, którzy oglądali ten artykuł kupili:

Jaspers 4R-120B
37% klientów kupiło dokładnie ten produkt
Jaspers 4R-120B
Artykuł dostępny w magazynie
Artykuł dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki
375 € Do koszyka
Jaspers 6D-150B
10% klientów kupiło Jaspers 6D-150B 355 €
Jaspers 3R-120B
8% klientów kupiło Jaspers 3R-120B 266 €
Jaspers 6D-120B
7% klientów kupiło Jaspers 6D-120B 345 €
Jaspers 4D-120B
6% klientów kupiło Jaspers 4D-120B 222 €
Najpopularniejsze Stojaki pod Keyboard
6 Oceny klientów:
  • 5
  • 4
  • 3
  • 2
  • 1
4.3 / 5.0
  • montaż
  • stabilność
  • wykończenie
Aktualnie ten produkt posiada ocenę tylko w innym języku.
Liczba pisemnych ocen 4 Wszystkie oceny
gb Tłumaczenie automatyczne (Pokaż oryginał)
gbOryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
stabilność
wykończenie
montaż
Bought and Regret Greatly
Arsxxi, 09.05.2017
I had the idea of buying the tier Jaspers stands in order to replace my RTX and Quiklok stands in X and then win the place below to put my rack devices below in a limited place. I chose the models 4R-120B & 3R-140B and once received in Paris (Thomann delivery service as always, the Top) sent them back to my secondary studio, small but in full nature, very inspiring for the creation.
Arrived on the spot it is a cold shower that awaits me, and here are the points to consider:
Unpacking. The tiny notice that does not correspond to the model chosen, no spare part, nor a single screw in case of breakdown. Missed 2 nuts (convenient to find them in the countryside). Poor presentiment.
The height of the lower part is limited for the lowest keyboard, and does not allow you put yourself normally before the piano, very poor calculations of the engineer (he never played the Piano evident). Without calculating the human knee height, you are then offered, stay on the knee-like rapper typing the keyboard with a finger. Impressive. No way to mount keyboard, because there is no room for other keyboards and it is not modular (nothing modular, see below).
Tube quality is mediocre. Aluminum too thin (nothing common like Roland drums stands for example) which I cut, in order to adjust their width, with a simple kitchen knife. Tube surface is too slippery and does not clamp well to clamps. My keyboards have different width (and depth) then, to refine the stand by trying to make it semi-modular, I cut the long tubes in half at the center by putting inside what I found in the country pantry, -the tube of my old vacuum cleaner, much better in metal quality by the way. So I could adjust stand width.
At Jaspers, there are no fixers to ensure the stability of their construction. I had to drill the holes in the tubes and put the folding nails in order to troubleshoot the constructive genius signed by Jaspers.
The allowable weight for the superposed keyboards is announced at 15kg max. Well, but it is my Minimoog Model D that remains at the limit under the risk of falling on my head. Who calculated these inappropriate weights? For the generalized weights for serious synths are, for example - Yamaha SY77, Oberheim OB12, Korg Z1 - each of 17 kg at least! These engineers from Jasper never approached musicians and their instruments before developing their product? No, it's not that the tablets only and nano synths that musicians use to announce the cruel reality! Why not to ask Musicians before building for them?
Without horizontal fixers on the tubes, the keyboards inevitably slip under their weight and arrive in perfectly twisted position on each level which does not add admiration neither to the concert public nor especially to the lucky owner of Jaspers stand.
It's really unstable too because of the construction itself: the superposed keyboards are placed on the tube facing A in causing a diving effect, when your whole stand, being overloaded begins to tilt towards you DANGEROUSLY. Normally low tubes should be heavier (hee, not the case, and why do) to stabilize this sordid creation. I put sand in low tubes to troubleshoot stability as one can, discovering at the same time that the casters are of cheap plastic type furniture of 3 cents without resin nor the screws. What stability can be talked about? Everything moves. I finally hooked the back of the stand with the cord to the ripe to not have the worst surprises, but how to do on the stage for example? To What musician will tie his stand? An idea? This is the direct question to Jaspers Engineering C °.
The arms of 40 and 60cm - are not modular either. Only one hole in the middle, not even three. I looked for the drill to confine those arms. Hello DIY. It is highly frustrating. The price required for a pair of these arms is nice 34 euros though ... The depths of synths being different, how do you adjust their position to see anyway the panels of your instruments? I'm exaggerating? Since the panels are virtually hidden from seen in Jaspers version?
No, it is a pure and also un-natural catastrophe.
In summary: the production of this brand is an Absolute FIASCO in engineering and in quality. The prices are way too high without being even justified. For me it is my money and my nerves that are lost but also the cheating and non-respect of the clients.
If I could ask for the refund! Or ?ll do these stands end their lives in the garbage? Or will it help me to put some pots and pans on top of it? (Too risky though). Looked, I gave Full constructive ideas to Jaspers house, can be in thanks and EN counterpart it refunds me my ¤ 597.70 anyway? I offer free ideas for improvement of their stands, is it valuable?
We'll see there.
In any case in current version I strongly discourages to buy the Jaspers stands, at least that their construction would not be reviewed from A to Z, the quality would be compliant ("made in Germany" - by whom?) And the price Adjusted to reality.
I ask Thomann to advance this note to Jaspers and demand that their production conform to the requirements of professional musicians. Or urgently mark: "amateur stand for light keyboards and boards". Thank you.
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
gb Tłumaczenie automatyczne (Pokaż oryginał)
gbOryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
stabilność
wykończenie
montaż
Great stand
05.09.2016
Flexible, light and stable!
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
375 € 1 605,73 zł
darmowa wysyłka, zawiera podatek VAT.

Cena w PLN podana jest w celach orientacyjnych

Artykuł dostępny w magazynie
Artykuł dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki
Powiadom innych o tym produkcie
Twój asystent sprzedaży
gb
Tel: +49-9546-9223-33
Fax: +49-9546-9223-24
Poradniki online
Controller Keyboards
Controller Keyboards
At the simplest level, a controller keyboard, also commonly known as a "master" keyboard.
 
 
 
 
 
Podsumowanie:
* Ceny zawierają podatek VAT. Do ceny artykułu(ów) należy doliczyć koszty wysyłki. Oferty ważne do wyczerpania zapasów. Za błędy w opisie i innego rodzaju pomyłki nie ponosimy odpowiedzialności. CK=Cena katalogowa produktu
(1)
Ostatnio obejrzane
Roland MC-707

Roland MC-707; Groovebox; ZEN-Core Sound Engine with up to 128 voices polyphony; 8 parts; 8-track sequencer with 128 steps maximum; 16 clips per sequencer track; up to 8 Loop tracks with Time Stretch and Pitch Shift; 3000 preset tones and...

(1)
Ostatnio obejrzane
Zoom F6

14-Track Multitrack Field Recorder 32-Bit float recording via dual AD converter, 6 Inputs with XLR / TRS combo jacks, Compact and lightweight aluminium housing, High-quality microphone preamps with up to 75 dB gain, Noise: -127 dBu (A weight, gain...

(5)
Ostatnio obejrzane
Mooer GE150 Amp Modelling & Multi

Mooer GE150 Amp Modelling & Multi Effects; multi-effects processor; 55 high-quality amp models from the Micro Preamp series; 26 different default cabinet simulations (IRs); supports 3rd party impulse responses (IRs, 2048 pts.); in 10 free user presets; 40 drum rhythms...

(1)
Ostatnio obejrzane
Harley Benton TE-20MN CA Standard Series

Electric Guitar Bolt-on neck, Body: Basswood, Maple neck with modern C-shape, Maple fretboard, Fretboard radius: 350 mm, Dot-inlays, 22 Frets, Scale: 648 mm, Nut width: 42 mm, Dual action truss rod, 2x TE-style single coil pickups, Electronics: 1 Volume...

(2)
Ostatnio obejrzane
Yamaha PSS-A50

Keyboard 37 Velocity-sensitive slim keys, 32 Voice polyphony, 42 Voices (instruments), 138 Arpeggio types, Phrase Recorder, Motion effect, USB MIDI connection, Battery and USB bus power supply (USB power adapter sold separately), 1.4 W speaker, Headphone jack, USB to...

Ostatnio obejrzane
Thomann DP-51 WH

Thomann DP-51 WH Digital Piano - 88 weighted hammer action keys with three sensors, 40 sounds, polyphony 128 notes, 50 styles, 60 songs, reverb, chorus, sequencer, dual-mode, split-mode, metronome, Master EQ, transpose function, speaker system 2x 15W, 3x pedals, USB...

Ostatnio obejrzane
Sony WF-1000XM3 Black

In-Ear Bluetooth Earphones Truly wireless, Wireless via Bluetooth, Optimisation of digital music files with DSEE HX, HD processor QN1e for noise reduction, Ergonomic tri-hold structure, Google Assistant, 6 mm Driver - dome (copper voice coil), Frequency range 20 -...

Ostatnio obejrzane
Toontrack SDX Decades by Al Schmitt

Toontrack SDX Decades by Al Schmitt (ESD); expansion pack for Toontrack Superior Drummer 3 (item 419735); produced and recorded by Al Schmitt at the Capitol Studios in Hollywood / Los Angeles; 5 complete drumsets and a and a large selection...

(1)
Ostatnio obejrzane
Fender SQ LTD Bullet Strat TTQ

Electric Guitar Limited edition, Body: Poplar, Neck: Maple, Fretboard: Indian Laurel, Neck profile: C neck profile, Scale: 648 mm, Fretboard radius: 241 mm, Nut width: 42 mm, 21 Medium jumbo frets, Pickups: 3 Single coils, Standard synchronised tremolo, 5-Way...

Ostatnio obejrzane
Erica Synths Pico System III Desktop

Erica Synths Pico System III Desktop; compact modular system; full analog design; contains: Stepsequencer, 2x VCO, 2x Mixer, LFO, Sample & Hold, Noise- & Random-Generator, 2x Funktion Generator, 2x Lowpass Gate, BBD-Delay & Output Section; patches can be stored on...

Ostatnio obejrzane
Yamaha PSS-E30

Keyboard 37 Mini keys, 32 Voice polyphony, 49 Voices (46 Voices + 1 Drum Kit + 2 SFX Kits (74 sound effects such as vehicle, animal noises, and other sound effects)), Quiz mode with questions about sounds and note...

Ostatnio obejrzane
Mooer Tone Capture GTR

EQ Sampler for Pickup Guitars Allows you to record the sound and tonal character of any guitar, Can be used as an EQ effects pedal without a sampler, 7 Built-in presets for EQ settings and saved guitar sounds, Awitchable...

Twoja opinia
Zgłoś błąd Zauważyles błąd i chciałbys nas o tym powiadomić?

Dziękujemy za Twoją wiadomość, zostanie ona przetworzona najszybciej jak to możliwe.