Harley Benton Solder-Free Patch Cable KIT

574

Kit for solderless patch cables

  • Consisting of 3 metres of cable and 10 angled plugs
  • Solder-free plug for precise mounting in seconds to the exact lengths required, for an individual pedalboard cabling
  • Excellent signal flow and low capacity for maximum transparency
  • 7x 0.15 mm copper conductor
  • Semi-conducting PVC and a braided copper / aluminium shield protect effectively against interference
  • Extra slim gold plated metal plug
  • Incl. cable cutter, screwdriver and assembly instructions
Produkt dostępny od Listopad 2017
Numer artykułu 410584
Jednostka sprzedaży 1 szt.
Colour Red
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Length 300 cm
Connector from 6,3mm TS Jack
Plug out Jack 6,3mm TS male
Pokaż więcej
77 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Czwartek, 4.04. and Piątek, 5.04.
1

574 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

419 Opinie

K
Świetny zestaw
KubaMakuch 31.01.2022
kable bardzo łatwe w montażu, szybko można dostosować długość między efektami, końcówki dobrej jakości, wąskie więc dobrze się mieszczą jedna obok drugiej, polecam
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

JS
Make your pedalboard clean again!
Jakub Soukup 06.08.2020
I've finally made my pedalboard properli wired. It is eay to make connectors, just try them with a pedal tuner before you zip-tie them to the board.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

p
Ciekawa alternatywa
piotrekle 16.10.2019
Ciekawa alternatywa dla patchowych kabli
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
VV
2 stars for the number of live shows that these cables worked on. Great for home, not so great for life on the road!
Vlad Vartosu 22.09.2021
I bought 4 of these kits for my entire pedalboard, approx. 19 pedals. I wanted to rewire and bring some cleanliness to it, which it did. The jacks and cables are fairly discreet and can bend to whatever shape you please, thus making a busy board look a lot tidier.

However, quality-wise, I am waiting and hoping that Harley Benton will revise this kit and make it a lot more reliable. Please bear in mind, this is not a good solution if you are a touring musician, and your show depends on your pedalboard. The connection of these cables is held together by a screw, and if you add that to a board that sits in a back of a car and bus, gets pulled to the stage in and out night after night, this system is doomed to fail in no time.

I am speaking out of personal experience, the cables failed me after only two live shows on the road.

However, I would recommend this kit to anyone who wants to build a board at home, wants full control of customization, and doesn't want to spend a fortune on patch cables.

I thought they were going to be the ideal solution for my pedalboard, but I will go back to soldered connections.

Thank you nonetheless, it was a good lesson learned.
wykończenie
8
0
Zgłoś nadużycie

Zgłoś nadużycie