Harley Benton Parts Potentiometer B500 kOhms

137

B500 kOhm potentiometer

  • 24 mm Housing
  • Toothed axle
  • For assembling on wood
  • 500 k ohms
  • B-linear
Produkt dostępny od Grudzień 2012
Numer artykułu 284179
Jednostka sprzedaży 1 szt.
Design Volume
Resistance Value 500 kOhms
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
8,50 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 25.04.
1

137 Oceny klientów

4.5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

60 Opinie

r
świetny potencjometr, dobry stosunek jakości do ceny
roland.mika@gmail.com 08.09.2023
Polecam zwłaszcza do gitar z hambakami :-) Jak za te pieniądze rewalecja .Wszystko działa nie obcina sygnału ,Dla mnie rewelacja ,Jestem zachwycony jakością produktów firmy Harley Benton .Wielki pozytyw i wielki plus. Ceny rewelacyjne .Serdecznie polecam .Roland Mika
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Finally a challenge to the so-called big-names (CTS,Alpha etc)
Anonimowy 29.08.2015
I bought this as I am frustrated at buying the big name brands only for them to be scratchy, stiff and poor longevity.

Admittedly I've only had this installed a week or so in my main guitar so I cannot verify it's longevity just yet, but it turns very smoothly indeed, it has no audible artifacts and has a nice gradual taper, unlike some other brands' potentiometers that go from 1=off to 2=full on then 2,4,5,6,7, etc are all the same value.
This is installed in a 2xHumbucker guitar 2vol 2 tone utilising 50's wiring so it's vital it has a good gradual taper.

very cool and keenly priced, thanks!
wykończenie
2
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Good replacement part.
Anonimowy 19.10.2014
I bought this potentiometer to replace the original of my Squier, that was damaged.

Had some fear of buying something so cheap, the truth is I have it for 8 months now and there's not a single problem. Moreover, this kind of pieces are always needed sooner or later, so it's good to have them to replace when needed.
wykończenie
2
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
EB
Pleasantly surprised!
Edgar Blackdagger 01.06.2022
I bought several of these to upgrade my cheap Squiers and Epiphones and I have to say, these pots are extremely good for the price, they feel stiffer than Fenders but looser than DiMarzios and I haven't had any problems since I bought these (it's been some years now).
One thing is for sure, I've had DiMarzios broken and I've never had an AllParts working for more than a year, but these pots haven't caused me any trouble for at least 4 years + they are very good for my wallet.

For my more expensive instruments I still prefer the Japanese-made Goldos, but just because they feel smoother and more reliable.
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie