Harley Benton Parts Classical Guitar Nut

151

Nut for Classical Guitar

  • Pre-slotted
  • Dimensions: 52 x 6 x 8.5 mm
  • Colour: Ivory
Produkt dostępny od Lipiec 2013
Numer artykułu 314057
Jednostka sprzedaży 1 szt.
Width in mm 52 mm
Unmachined No
Instrument Guitarra Clássica
10,60 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 24.04.
1

151 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

55 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
It´s okey!
Susanne1843 04.04.2014
I´ve bought this Nut a month ago for a concert guitar, which I am restaurating. I´ve choosen ist, becaus I had little choice. The quality is okey, but not the best. If you need a cheap Nut, take this one. If you can spend more money, do that!
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Just Awesome!
Anonimowy 15.03.2016
I bought this guitar nut to fix up an old guitar i have lying around. The strings were touching the frets and I was getting a terrible fret buzz on the E cord.

I knew my guitar was a 52mm neck but i didn't measure the height or spacing of the strings. Because i knew eventually some sanding down would be necessary. And since its an old banger guitar that hasn't had a pleasant life i didn't really bother.

The nut was bang on the right size for my guitar! I couldn't even believe it! I didn't have to touch it one bit! I removed my old nut which was a piece of trash (it was a hollow piece of plastic that only touch the guitar neck with the outside borders, nothing in the middle to transmite vibration). And glued on the new nut!

Dropping the nut on the fret board, you could hear a clear distinction from the new to the old one. The new nut had a much deeper and rich sound then the old one. Its also a solid piece (has only 2 small hole on the bottom, don't really know why) not a hollow one like i had, so it transmites vibration a lot easier.

After gluing it on twice (the first time i was shy on the glue) and installing new strings the guitar came back to life! So happy!

I am so pleased with this nut...The price is awesome, the quality is good and the installation was a breeze!

When i received the nut under a more meticulous inspection i found the the nut was cracked. I probably happened during transportation as i bought a bunch of stuff. I contacted Thomann and they sent me a another one free of charge! So as always Thomann's service is flawless!

Cheers guys! Rock on!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Well Slotted
BillDL 21.08.2020
I don't know what it is made from, but it feels a lot harder than more expensive but softer plastic ones I have bought before. I needed a wider than normal 6-slot nut to convert an old 12-string acoustic to 6-string that takes really heavy gauge strings. I will adjust the slot depths myself to the correct fingerboard radius. If I mess up, it cost me less than a bottle of beer. Maybe I should have bought two or three just in case?
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
Does its job, doesn't bankrupt you
Slimsilver 16.03.2021
Perfect generic replacement part for an old classical guitar. Unless you want to be fancy, don't bother with the expensive ones. This will do just fine.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie