Harley Benton Electric Guitar Kit T-Style

T-Style Electric Guitar Kit

  • Complete DIY set
  • Bolt-on neck
  • Body: Rengas (wood colour may vary)
  • Neck: Maple
  • Fretboard: Amaranth
  • Fretboard inlays: DOT
  • "Double Action" truss rod
  • Neck profile: C
  • 22 Frets
  • Fretboard radius: 350 mm
  • Scale: 648 mm
  • Nut width: 42 mm
  • Truss rod
  • Pickup: 2 Single coils
  • 1 Volume control and 1 tone control
  • 3-Way switch
  • Chrome hardware
  • Die-cast machine heads
  • Stringing: 009 - 042
  • Finish: Natural

Note: A certain degree of skill in handiwork is required for successful assembly

Dalsze informacje

Colour Natural
Pickups SS
Fretboard Amaranth
Tremolo None
Body Hardwood
Top None
Neck Maple
Frets 22
Scale 648 mm
Incl. Case No
Incl. Bag No

Tak wybrali inni klienci

Klienci, którzy oglądali ten artykuł kupili:

Harley Benton Electric Guitar Kit T-Style
67% klientów kupiło dokładnie ten produkt
Harley Benton Electric Guitar Kit T-Style
Artykuł dostępny w magazynie
Artykuł dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki
77 € Do koszyka
Harley Benton TE-52 NA Vintage Series
7% klientów kupiło Harley Benton TE-52 NA Vintage Series 148 €
Harley Benton TE-20HH SBK Standard Series
4% klientów kupiło Harley Benton TE-20HH SBK Standard Series 98 €
Harley Benton TE-20MN BM Standard Series
4% klientów kupiło Harley Benton TE-20MN BM Standard Series 88 €
Harley Benton TE-30 BE Standard Series
2% klientów kupiło Harley Benton TE-30 BE Standard Series 118 €
Najpopularniejsze Modele T
1229 Oceny klientów
  • 5
  • 4
  • 3
  • 2
  • 1
4.3 /5
  • właściwości
  • dźwięk
  • wykończenie
Łącznie
właściwości
dźwięk
wykończenie
OK za te cene
userpassword, 23.02.2018
Hobbystycznie mozna z tego zlozyc sobie gitare - czemu nie :)
Plusy:
+ korpus z solidnego drewna (u mnie 2 kawalki)
Minusy:
- nierówno nabite progi - potrzebny szlif wyrównawczy
- kiepskie przetworniki - daje zmulony dzwiek
- swieze drewno - otwierajac opakowanie w calym domu rozniósl sie zapach tartaku ;)

Reszta dziala jak powinna (w tym napinanie gryfu). Wiec jak ktos chce tele i chce sobie przy nim podlubac to moze byc.
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
gb Oryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
właściwości
dźwięk
wykończenie
Good kit to work with, but not a guitar one can assemble and play right away
V_Korneev, 09.05.2018
PROS.

1. Technically, this kit allows you to follow an IKEA-like manual and put together a guitar, functionally identical to a cheap guitars of well-known-brands-we-won?t-mention-here for a fraction of their price.

2. The body and the neck are done surprisingly well for a price, they fit together better than I saw on some? ahem? much more expensive guitars. Frets don?t try to cut you to death. Neck is not bent to a propeller shape. Slots in the body for neck and pickups are precise enough.

3. Other parts are inexpensive yet mostly funcional. I planned to replace everything except body and neck, but left tuning machines, bridge and some other things be: they are okay to the level when ?good enough? turns into ?just good?.

CONS.

1. Frets require some work. Frets are unpolished (which is not a problem) and sometimes are slightly uneven (which IS a problem). So if you need a low action without buzzing, fret leveling is in order, and fret leveling is not a task for a complete newbie.

Nut is a regular plastic thing, and it is not set to a proper height. To get a proper action and proper tone, you should cut it to the right height, which requires some minimal understanding of the task, some skills and at least some tools. So, again, not a task for a complete newbie.

2. There?s no shielding and a kit manual never mentions that shielding is required, which could become a problem for a newbie. You?ll need to shield a guitar with foil or graphite, otherwise it will work like a good old radio antenna, buzzing left and right.

3. Build quality is not perfect when it comes to a small things. All screw holes, including holes for neck bolts, are hand-drilled sloppily, which means random depth and direction of each and every hole. If you suffer from serious case of perfectionism, just like me, it?s easier to seal and redrill those holes. Otherwise you probably can ignore it: screws still hold it together, so it?s okay. Tip: always use a wax on screws, it helps.

Fingerboard of my guitar had a small splotch of some brownish substance that tried (with questionable success) to mask a small dent in a wood. It didn?t affect playability, but it wasn?t nice to look at form close distances, so it had to be fixed.

Tone control in my kit wasn?t working. It wasn?t a problem for me, as I just replaced all electronics. But such things could be a problem for some kiddo, who doesn?t know how to solder wires yet. Be ready to rewire the guitar properly.


CONCLUSION.

In general, this kit is a good base for amateur guitar builds and experiments. Reshape the body, paint it wild, cut the head as you please, add pickups of your dreams... Kit has no critical flaws and allows you to build a really good ?semi-custom? guitar for a ridiculously low price if you are ready to put some work in it.

Kit is ?technically functional? even right after screwdriver assembly and basic tuning, but don?t expect much from it. Fifteen minutes of intense screwdriving will turn a kit into an electromechanical tool, which in a dim light could be considered an electric guitar. But it won?t rise to its full potential without additional efforts.
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
gb Oryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
właściwości
dźwięk
wykończenie
Если Лего стало скуч&#1085
Vahtang11, 22.03.2021
Брал, чтобы в коллекции появился Телекастер. Разница между этим комплектом и уже готовым телеком от HB составляла 600рублей, и если вы не хотите заморачиваться с кастомизацией, то лучше выбрать уже целый. Однако, в пользу DIY играет дерево корпуса - это индонезийский палисандр. Телекастеры из красного дерева это, как минимум, не обычно.
Из плюсов: цена, нестандартные материалы(корпус: палисандр, накладка: амарант); достаточно нестыдная фурнитура(не ждите чуда за эти деньги), приличный звук.
Минусы: надо заморачиваться со столярными работами; выпиливать голову, сверлить корпус для сквозной протяжки струн; наколки под саморезы для крепления пикгарда нанесены неточно, сам пикагрд надо подрезать в районе крепления грифа, струны сразу отнести на кухню - резать коржи, желе и другие мягкие продукты.
Но это, прямо скажем, мелочи.
Что в итоге? По факту вы получаете очень нестандартный телекастер из неплохой древесины за смешные деньги и фурнитурой, которую можно со временем поменять на более дорогую. Но даже в варианте из коробки это будет инструмент по уровню превосходящий SQUIER AFFINITY, а ценой в 4 раза дешевле.
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
gb Oryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
właściwości
dźwięk
wykończenie
Roemans, 11.09.2018
An overview of how the building of my Harley Benton telecaster kit went.

Step 1: Neck
I started with checking if the frets were level. They were playable but still needed some levelling. They were also very scratchy and the top was barely crownded.
I levelled, crowned and polished the frets.
Then I cut the headstock into shape, sanded it smooth and covered it with 6 coats of clearspray.

Step 2: Body
The body was very ruff and had a lot of dings and even a few holes in it.
I sanded it until it was perfectly smooth. Then I filled the holes, scratches, dings and woodgrain with wood filler and sanded everything smooth again. Next I applied 2 layers of primer and sanded everything smooth. After this I filled al the remaining holes and scratches again with woodfiller, after this, again I sanded everything smooth. Next I spraypainted the body with 6 layers of turquoise lacker and 3 layers of satin clearcoat.

Step 3: assembly
The tuners and string trees went in perfectly with no problem. The neck fitted perfectly in the neck pocked. The bridge, output jack cover, strap buttons and the plate with the switch and knobs also fitted perfectly.
The pickguard however not so much. The holes in the body didn't align with the holes in the pickguard. I drilled new holes in the body and now it fits. The pickguard does touch the plate with the pickup selector, this is not supposed to happen.

Step 4: setup
The tuners hold tune but are a bit difficult to tune with, they are a bit jumpy.
The bridge is easy to intonate but impossible to intonate 100% perfect because of it's design, but that was to be expected.
The nut of the guitar is cut to high, because of this the action is always high and the first few frets will sound out of tune. I am going to fix the nut later.
I had to adjust the pickup height a lot.

The result:
- Even with a 9-42 set of strings this guitar is very loud acoustically. It resonates more than any guitar I have ever played.
- The pickups sound remarkably good for such a cheap kit. I dont think I will change them anytime soon.
- The guitar plays very nicely, I expect it to play even better once I lowered the nut slots.
- The guitar holds tune good enough.
- The pickup selector is wobly and stiff. The volume knob is pressed against the metal plate it's atached to, this makes it imposible to operate it with 1 finger. It has to much friction. The tone knob works perfectly.

Conclusion:
The kit I got has a very good neck and body but the hardware is lacking. The hardware is functional, you could keep it, but I am probably going to upgrade it.
I have a feeling once I upgraded it this is going to be my favourite guitar.
Score:
Body and neck 9,5/10
Hardware 5/10
Pickups 8/10
Total 7,5/10


UPDATE:
I placed straplocks, upgraded the stringtrees and the nut to graptech, changed the tuners to harley benton locking tuners, placed compensated bridge sadles and placed a fender 4-way tele switch (I discovered that the original switch used the same pickup configuration in both position 1 and 2). I also maneged to fix the hard to turn volume knob.

After these upgrades this guitar is fenomenal. It holds tune very well and is very smooth to tune, it has sustain for ages, with the 4-way switch you have a lot of tonal options and it plays like butter.
It is my favourite guitar at the moment.

Score with upgrades:
Body and neck 9,5/10
Hardware 9/10
Pickups 8/10
Total 9/10
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
Wyświetl wariacje tego produktu
Harley Benton Electric Guitar Kit T-Style
(1229)
Harley Benton Electric Guitar Kit T-Style

T-Style Electric Guitar Kit Complete DIY set, Bolt-on neck, Body: Rengas (wood colour may vary), Neck: Maple, Fretboard: Amaranth, Fretboard inlays: DOT, "Double Action" truss rod, Neck profile: C,...

Harley Benton TE-52 NA Vintage Series
(1139)
Harley Benton TE-52 NA Vintage Series

Electric Guitar Body: American ash, Bolt-on neck: Canadian maple with roseacer skunk stripe, Neck profile: C, Fretboard: Maple, Fretboard radius: 350 mm, Fretboard inlays: Dot, 21 Frets, Scale: 648...

Harley Benton TE-30 BE Standard Series
(701)
Harley Benton TE-30 BE Standard Series

Electric guitar Body: Ash, Bolted maple neck, Neck profile: C, Fretboard: Maple, Fretboard radius: 350 mm, Dot inlays, 21 Frets, Scale: 648 mm, Nut width: 42 mm, Neck radius: 13,78", Double-action...

Harley Benton TE-20 SB Standard Series
(444)
Harley Benton TE-20 SB Standard Series

Electric Guitar Body: Basswood, Bolt-on maple neck, Neck profile: Modern C, Fretboard: Amaranth, Fretboard radius: 350 mm, Dot inlays, 22 Frets, Scale: 648 mm, Nut width: 42 mm, Double action truss...

Harley Benton TE-90QM HH Trans Blue
(96)
Harley Benton TE-90QM HH Trans Blue

Electric Guitar Chambered body, Body: Mahogany, Top: Quilted maple, Neck: Maple, Neck attachment: Bolt-on, Fretboard: Amaranth, 22 Frets, Scale: 648 mm, Nut width: 42 mm, Fretboard inlays: Abalone...

Harley Benton TE-40 TBK Deluxe Series
(578)
Harley Benton TE-40 TBK Deluxe Series

Electric Guitar Body: Basswood, Top: Ash, Bolt-on neck: Maple, Fretboard: Pau Ferro, Fretboard radius: 350 mm, 22 Frets, Scale: 648 mm, Nut width: 43 mm, Dual action truss rod, Pickups: 2 Roswell...

Harley Benton TE-20 BK Standard Series
(321)
Harley Benton TE-20 BK Standard Series

Electric Guitar Bolt-on neck, Body: Basswood, Neck: Maple, Neck profile: Modern C, Fretboard: Armaranth, Fretboard radius: 350 mm, Dot fretboard inlays, 22 Frets, Scale: 648 mm, Nut width: 42 mm,...

Harley Benton TE-90QM Trans Red
(278)
Harley Benton TE-90QM Trans Red

Electric Guitar Chambered body: Mahogany, Top: Flamed maple, Bolt-on neck: Maple, Fretboard: Amaranth, Fretboard inlays: Abalone dots, Ivory body binding, Nut: Bonoid, 22 Frets, Scale: 648 mm, Nut...

77 € 348,48 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 15 €

Cena w PLN podana jest w celach orientacyjnych

Artykuł dostępny w magazynie
Artykuł dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki

Wysyłka spodziewana do dnia Piątek, 18.06.

Powiadom innych o tym produkcie
Twój asystent sprzedaży
Tel: +49-9546-9223-20
Fax: +49-9546-9223-24
Poradniki online
E-Guitars
E-Guitars
Electric guitars are ten a penny and nowadays there are at least as many models and makers to choose from.
Poradniki online
Guitar Setups
Guitar Setups
The range of available guitars and amps has never been greater than it is today, and a huge variety of sounds are easily accessible.
 
 
 
 
 
Dokumenty do pobrania
Dokumenty do pobrania
 
 
 
 
 
Podsumowanie:
* Ceny zawierają podatek VAT. Oferty ważne do wyczerpania zapasów. Tabela z kosztami wysyłki znajduje się tutaj. Nie ponosimy odpowiedzialności za jakiekolwiek niezgodności i błędy. Faktury wystawiana są w języku angielskim i walucie EUR.
Ostatnio obejrzane
iZotope Community Appreciation Bundle

iZotope Community Appreciation Bundle (ESD); plug-in bundle; contains 11 essential tools for audio editing and creative music production; consists of Nectar Elements, Neutron Elements, Ozone Elements, RX Elements, BreakTweaker, Stutter Edit 2, Iris 2, Trash 2 as well as Exponential…

3
(3)
Ostatnio obejrzane
DSM & Humboldt Simplifier DLX Amp/Cab Sim

DSM & Humboldt Simplifier Deluxe Amp/Cab Simulator; Effects Pedal for Electric Guitar; Pre-Amp, Power-Amp and Cab-Simulator; all Analog 0 Watt Dual Channel Amp, with Cab Simulator, multistage Reverb, and versatile connectivity options; All, in an extremely small format; 2 Studio…

1
(1)
Ostatnio obejrzane
Quilter Superblock US

Quilter Superblock US, Solid State Pedalboard Amplifier for Electric Guitar; Three Classic US Amplifier voicings: 60 Tweed, 62 Blonde & 65 Black; comparable power to a 25-Watt Tube Amp when powered by the supplied PS-24 Power Supply or 1 Watt…

Ostatnio obejrzane
Casio CT-S1WE

Casio CT-S1WE Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

Ostatnio obejrzane
Polyend Tracker AE Legowelt

Polyend Tracker AE Legowelt; Limited Artist Edition; individual design; incl. orig. project files and sample packs;, Stand Alone Hardware Tracker; Step Sequencer & Song Arranger; Sampler (Forward, 1 Shot, Backward, Ping-Pong); Granular Synthesizer; Wavetable Synthesizer (compatible with Ableton Wave and…

Ostatnio obejrzane
Zhiyun WEEBILL-S Gimbal

Zhiyun WEEBILL-S Gimbal; Three-axis gimbal for DSLR and mirrorless system cameras; simple and safe handling thanks to new algorithms and stronger motors even for fast movements; compact dimensions make the gimbal the perfect companion for reportage and action shots; ergonomically…

Ostatnio obejrzane
Blue Microphones Snowball iCE USB Black

Blue Microphones Snowball iCE USB Black; Plug 'n Play USB microphone for recording and podcasting; USB condenser microphone; polar pattern: cardioid; perfect for vocal and music recordings as well as podcasts; frequency response: 40 Hz - 18 kHz; sample rate:…

Ostatnio obejrzane
Behringer MIC300 Tube Ultragain

Behringer MIC300 Tube Ultragain; 1-channel tube preamp for Mic and Instrument; hand-selected 12AX7 tube; built-in limiter; 20dB pad; phase reverse switch; +48V phantom power; gain and output volume controls; LED meter; connections: XLR Mic-Input, Instrument-Input 6.3 mm jack balanced, XLR…

Ostatnio obejrzane
RAV Vast B/H Kurd red

RAV Vast2 B Kurd red edition, B2/ F#3, G3, A3, B3, C#4, D4, E4, F#4, A4, Handpans-inspired steel tongue instrument, 2mm Steel, diameter 51cm, hight 17cm, weight 5,9kg, incl. bag

1
(1)
Ostatnio obejrzane
Line6 HX Stomp XL

Line 6 HX Stomp XL; Multi Effects Pedal for Electric Guitar; Exceptional sound quality with 123 dB dynamic range, features the same SHARC DSP chip and HX models as the Helix, eight capacitive touch footswitches with colour-coded LED rings, 300+…

Ostatnio obejrzane
Casio CT-S1RD

Casio CT-S1RD Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

1
(1)
Ostatnio obejrzane
Elektron Power Handle

Elektron Power Handle; battery adapter for Elektron Model:Samples and Model:Cycles; easy mounting; requires 4x AA batteries (not included); also works as tilt stand; system requirements for Elektron Model units: firmware 1.13 or newer; incl. connection cable, connection screw and manual;…

Twoja opinia
Zgłoś błąd Zauważyles błąd i chciałbys nas o tym powiadomić?

Dziękujemy za Twoją wiadomość, zostanie ona przetworzona najszybciej jak to możliwe.