Göldo Pot 500K Lin

536

Potentiometer for Guitar and Bass

  • Resistance: 500 kOhm
  • Resistance curve: Linear
  • Knurled shaft
  • Thread length: 10 mm / 0.393"
  • Thread diameter (bore): 8 mm / 0.305"
  • Housing diameter: 24 mm / 0.95"
  • Durable
  • Tin-plated case for very easy soldering
Produkt dostępny od Luty 2006
Numer artykułu 189746
Jednostka sprzedaży 1 szt.
Design Volume
Resistance Value 500 kOhms
Characteristic Curve Linear
Thread Length 10,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
20,90 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 26.04.
1

536 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

178 Opinie

T
Great ones
TrashPanda 28.05.2023
These work great for any guitar needs, used em in Teles to semihollows, always no problems.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
EB
The best yet.
Edgar Blackdagger 03.12.2019
I've tried a lot of the pot options available, from cheap brands to American AllParts, Fender and DiMarzio but there's nothing like these Goldos.

No-name brand pots are basically on-off switches, Fender ones turn way too easily so most of the times they get turned accidentally, DiMarzio ones are extremely stiff so you just can't do volume and tone swells + I had a DiMarzio push-pull on a guitar once and after 2 years of light use, it just fell off when I pulled it (plus the price is ridiculous) and the AllParts ones are just mediocre and a bit overpriced.

I've bought exclusively Goldo Made In Japan pots for the last 4-5 years for my main 3 electrics and they are just perfect. Perfect feel, perfect functionality, perfect durability.
No scratchy pots since 2015!!!
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
BI
Very good replacement
Benjamin I. 14.07.2020
One of the volume pots and the tone pot broke on my Stagg jazz-type bass when I decided to make them tighter. To be prudent I changed both volume pots using these Göldo units. Tone and hum didn't change at all but the new knobs are much slicker than the old ones.

Soldering them was easy and the assembly is solid, I only had to add a washer on the underside so the new volume knobs would reach the same height as the tone pot which is another type.

Unlike the worn-out Stagg units that broke when tightening them a little more, these are built tough and can be tightened firmly without breaking. Affordable are satisfying so I can recommend them.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
Fine pots
LargePotato4455 12.09.2021
Good potentiometers, wanted to replace them because my guitar had mini-pots that worked badly.

The main problem was that the holes in the guitar body where potentiometers are inserted were too small, I had to expand them a little with a file.
After this I soldered them, installed, and I think that they slightly changed the sound.

I'm happy that now I can normally change the volume of the guitar, on the previous pots the volume changed only if I roll them to 0. But with these all is fine.

Don't have any complaints, recommend them!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie