Gibraltar SC-EA200 Extension Arm

21

Extension Arm

  • With multi-clip at the end
  • For all types of mountings, L-Rods, cymbal arms
  • 360° rotatable
  • Adjustable height from approximately 33 to 53.5 cm (13" to 25")
Produkt dostępny od Styczeń 2013
Numer artykułu 298547
Jednostka sprzedaży 1 szt.
Double Tom Holder No
Ball Joint No
Tom Holder L-Arm
Additional fitting for cymbal arm No
238 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny za 1-2 tygodnie
Dostępny za 1-2 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

21 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

stabilność

wykończenie

9 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
E
Combined well with the 9706NL snare stand
Exci 14.11.2019
I used this with the 9706NL to save some floor space. It keeps the snare stand very stable. Perfectly happy.
stabilność
wykończenie
montaż
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Gibraltar SC-EA200
Paul330 15.05.2013
Good product, worked for use with no- leg snare stand, but a little too short for my needs. Can easily be adapted for several uses; mounting stands in awkward places, extending cymbal booms on racks, or stabilizing unsteady stands when fastened to a rack or other stand. I have used the EA200 to avoid a Hi hat stand shaking and creeping/moving on stage and even to mount a microphone off this extensions' grab clamp right into the bass drum. I've also used it to secure a damaged music stand and to install a boom microphone on a rack during a recording emergency where other equipment was lost; useful, and very strong-it will take a beating and can easily be employed to mount a secondary snare basket or bongo stand to a rig.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Ideal for Drum modules
Anonimowy 25.05.2016
I purchased this Arm so that i could mount a Roland SPD-SX on my Drum Rack, it works perfectly and is more stable than using a multi-clamp attached to a cymbal stand, because of the diameter you can easily swap it in and out of a cymbal stand base for stand alone use.....Perfect!
Plus Thomann manage to ship and have items delivered quicker than most UK retailers!
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
MS
Matyas S. 02.06.2015
Needed something for reach and this was an easy choice. As a Gibraltar-fan, I can honestly say, if you need something for reach, distance or stealth placing, these will help. Strong, sturdy, never have to worry about them give in on you.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie