Gewa EQS-10B Keyboard Stand

334 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

stabilność

wykończenie

214 Opinie

Gewa EQS-10B Keyboard Stand
215 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 24.04.
1
google translate gb
Wystąpił błąd. Proszę spróbować później.
AT
Anton Tokman 21.01.2020
I use this stand with keyboard and laptop (with additional grip for laptop I've bought separately).
Foldable, solid, slightly heavy but with great payload. I'm really satisfied with this stand.
---
Использую эту стойку для клавишного инструмента и ноутбука (с дополнительным крепление для ноутбука, которое я купил отдельно).
Складная, устойчивая, тяжеловата, но с большой грузоподъёмностью. Я полностью доволен этой стойкой.
stabilność
wykończenie
montaż
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
Gewa Basix Keyboard Stand
Dan1991 12.08.2017
I use this stand at home to hold a Yamaha P45 keyboard, also purchased from Thomann.

The Gewa stand is well made, and does not feel like the cheap 'hollow legged' stands you so often find at this price point. It has a wide range of height and width adjustability to fit many heights and keyboards.

It folds up neatly and quickly, so could also be ideal for musicians looking for a lightweight and portable solution for their keyboards.

My one complaint is that even at its widest, it is still a little short on both sides for the Yamaha P45. The 'feet' of the keyboard hang off the ends of the stand. However, it doesn't seem to have much of an effect on overall stability.

I would buy another!
stabilność
wykończenie
montaż
4
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Great quality and small price
Tazanda 29.12.2021
It's very stable, easy to open and close, and easily adjustable for your height. Soft surface to avoid damaging the equipment.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Not very good
Thoracius 30.10.2022
Getting an even height on all four legs in tricky. Often feels rickety.
The range of heights isn't very useful. Does not go high enough to use when standing.
The set screw for adjusting the width can dig into your thigh when sitting because it protrudes downwards.
Not very useable for smaller synths that don't span the width from one end to the other.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
y
Great for tight spaces
yvvv 16.11.2022
Bought to replace the stand that came with my Korg SP250. Being able to adjust the width of the stand & also the fact that it has 4 separate legs (not a metal frame like the original) meant I could fit it in nicely between other furniture in a cramped bedroom. Since the 4 feet are adjustable there’s no rocking on uneven floors. However I didn’t have a way to attach the piano to the stand - it just sat on top.
Held the weight of the piano for months on end with no issues, it did bow slightly in the middle but didn’t seem an issue. Folds up very easily but pretty heavy so probably wouldn’t recommend for regular gigging.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
MB
Sturdy
Magnuss Baugis 06.02.2021
Sturdy but a bit clunky, can be a pain in the ass if you have to go to a gig on foot. Nice that it has adjustable width and height, but the hole in the middle requires a solution if you, for example want to use several smaller keyboards (I found that one of my gear hardcases fits perfectly on top of it effectively making it into a wooden table). I also used it as a workbench when I had to cut vinyl floor tiles, so it can take quite some abuse.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
e
Pretty good
enabrennan 24.03.2021
I bought this for my Nord Electro 4D. It's a sturdy stand but I wish the leg extension increments were more precise to avoid wobbling. The top extension is not very secure also and the poles slide out.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
BJ
Leg adjustment difficult
Blue Jinn 05.12.2022
Very low price.

Adjusting the legs is difficult to get all to match and the mechanism does not appear reliable. There are small indentations on the legs. The purpose appears to be to line up with the thumb screws. However, there is no good way to tell if they are lined up which makes me worried that they won't hold or are misaligned. The only thing holding the legs is a pointed tip thumbscrew.

It says it is rated to 50kg. I plan on putting approximately 15-20kg on it.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
s
Excellent
siod 04.02.2020
Very easy to adjust and lock into place, the height and the width. Once adjusted to your required dimensions, it is very quick and easy to pack up or setup. I was able to use 2 of the 6 pre-existing holes on the top and I drilled 2 extra holes to create a custom fit for my Roland Juno 76 synthesizer. It has a very stable construction and I have no worries about my synth falling off or being knocked over. I would with all certainty, recommend this to anyone with a need for it.
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Good for multi purposes
Per Österlund AKA Cnl TAF 02.03.2021
I find the Gewa EQS-10B Keyboard Stand very good, it is very sturdy and @ a very good pricepoint. it can act to support your keyboard, or dj rig, mixingconsole or whatever ;),...just amazing! can recomend
stabilność
wykończenie
montaż
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Gewa EQS-10B Keyboard Stand