Enttec DMX USB Pro MK2 Interface

70

DMX USB Interface

  • MK2 based on a new, compared to its predecessors 6 times faster, processor
  • Controls up to two universes, 1024 DMX channels
  • Allows storage and playback of a small show with up to 512 DMX channels
  • Compatible with many programs on the market such as ArKaos, Martin M-PC, Freestyler, LightFactory, WYSIWYG or Madrix
  • Supports RDM (Remote Device Management) and can be updated with a firmware upgrade at any time
  • Housing: aluminium with anodised surface
  • Incl. micro USB cable and breakout cable with 2x 5-pin XLR female and 1x 5-pin XLR male

Features:

  • DMX 512 interface (output / input)
  • Compatible with Mac, PC and Linux systems
  • RDM (Remote Device Management)
  • Function: DMX (RDM) -USB Interface
  • Protocol: DMX 512 (1990), DMX 512-A
  • DMX 512 channels: max 1,024 (2 DMX outputs), max. 512 (1 input)
  • DMX 512 connector: 5-pin XLR male / female
  • USB port: Micro USB female
  • Case protection rating: IP 20
  • Dimensions (LxWxH): 10.5 x 6.6 x 2.2 cm
  • Weight: 0.2 kg
  • Can be used as DMX output / input interface
  • Compatible with a variety of programs such as M2PC, MagicQ, D-PRO, WYSIWYG, Capture, ArKaos, Modul8, Plexus, Light Factory, ShowCAD, Freestyler etc.
  • Internal memory for up to 512 channels
  • EEPROM memory
  • Multicolour status LED
  • Isolated DMX inputs / outputs (1.500 V)
  • Configurable DMX refresh rate (1 - 40 Hz)
  • Configurable Break Time (96 µs - 1.3 ms)
  • Configurable MaB time (10,6 µs - 1.3 ms)
  • Possibility of firmware upgrades
  • Optional software: PRO Manager
  • Optional MIDI breakout cable
Produkt dostępny od Styczeń 2013
Numer artykułu 303000
Ranking sprzedaży 1 szt.
Type USB-Interface
Type of construction Desktop
Connection for PC/Ethernet USB
Universes (Outputs) 2
DMX-Output 5-pole XLR female
DMX-Input 5-pole XLR male
RDM-capable Yes
Internal memory Yes
198 € 929,99 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 9,90 €
Cena w zł podana jest w celach orientacyjnych
Dostępny w magazynie
Dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 6.07. and Czwartek, 7.07.
1
google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Intermittent
Anonimowy 20.10.2015
I was initially pleased with the build quality as it felt really robust for this type of interface but after a couple of months use the USB output was intermittent. As we only have the one interface to run our light show we took the top off in desperation just before showtime to try to get it working and by sheer luck found the mini USB socket had clicked out of the PCB. It is still working but the socket is now held in with a piece of gaffa and some foam - It is probably just bad luck that mine had this fault but it caused some heart stopping moments when the whole thing failed
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
RM
Lovely USB to DMX
Rhys M 02.10.2019
Brought this as cant afford any gear from MA, and was very pleased how it preforms.

Pros:
- Able to use any software I would like, with or without of Artnet to DMX software
- Built with metal case so it wont crack, unlike plastic
- Comes with 4 rubber feet so it wont get scratched on the table or other surfaces

Cons:
- Uses USB 2.0 with is quite annoying because I tried with 3.0 and the DMX output was not stable, unable to be used with USB 3.0


Not yet used RDM with the device, because I don't have any RDM fixtures. Works amazing with Onyx, haven't used any other lighting software, but I expect it to behave the same way.

For the price and size of this USB to DMX, and able to output 2 universes, I will definitely carry on using it for the upcoming years.
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
G
Ideal with Freestyler
Gilbz 26.11.2018
Needed another universe and this does the job.
The only negative is the USB input being (don't know the name) the same as you'd use on an android phone. The interface is quite heavy and I feel the input isn't sturdy enough.

Having said that it's a great DMX interface and works amazingly well with Freestyler
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
Read this before plugging it in
Stuart6015 06.10.2014
Works fine once I sussed out the USB lead. At first USB connect was very intermittent. I cut away some of the plastic molding on the USB plug on the lead that was stopping it plug in all the way and it was fine after that.
Apart from that it the unit is fine.
1
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat