Eminence APT80 V2

173

Supertweeter

  • Extremely linear frequency response
  • 45 W RMS at 3.5 kHz
  • 85 W RMS at 5 kHz crossover frequency
  • Dispersion pattern: 80° conical
  • SPL: 105 db (1w/1m)
  • 3.5 k - 20 k
  • Baffle cutout: 80 mm
  • Dimensions: 87 x 87 mm
  • Weight: 700 g
Produkt dostępny od Październik 2005
Numer artykułu 186936
Jednostka sprzedaży 1 szt.
279 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 24.04. and Czwartek, 25.04.
1

173 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

dźwięk

wykończenie

67 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
APT80
David123Harry 30.04.2014
I have built many speakers over the last 5 years and for nearly all of them have chosen to use the APT80. They are simple, small but amazingly powerful super tweeters. They are perfect for both indoor and outdoor applications and throw a great distance. Have used in a homemade line array system for large outdoor events and the clarity is fantastic, especially when you consider the price. I have found some drawbacks. The diaphragm can be replaced if it ever goes but in my opinion the results are hit and miss and i'd recommend buying another. Even with the most accurate hand and soldering techniques, the tweeter is still likely to blow again the next time used as if it is not perfectly aligned, the design means that it will blow. That said, the price is extremely reasonable so this should not be a problem. I have tried using this more recently in conjunction with a Eminence PXB-3k5 crossover and with the addition of the fuse lamp, have never had a tweeter blow on me, even when cranking it up to silly volumes with a heavy metal band. On the whole, a great product but do seriously consider putting an eminence crossover with fuse lamp on as it will save you loads of hassle.
dźwięk
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Eminence quality
Anonimowy 09.09.2014
The APT80 is probably the standard for custom bass cabs. Not used much in the PA enviroment. If filtered in the right way it sound very nice, crispy and punchy. But as you'd expect, if you cut it too low it will sound pretty harsh and could break.
I've used a few and I must say that for the price they're hard to beat. I think CIARE makes the best tweeters in the PA/Bass cab world (at least at human prices) but this one is nice for the size. I'd certainly use it again, expecially on a cab with a mid or a woofer that goes high enough.
dźwięk
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
I
Powerful and Clear
Ilgar 02.03.2022
I tuned the crossover Hi-Pass to 4.2 kHz regarding its specification. Satisfied its power and clear sound.
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
G
Amazing
GeoBota 14.06.2020
Extremely clear sounding twitters and very powerful!
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie