Electro Harmonix Switchblade Plus

246

Effects Pedal for Guitar and Bass

  • A / B or A + B-Box
  • 1 Input and 2 outputs
  • Tuner output (can also be used for other effects)
  • Passive operation
  • Measurements (W x D x H): 65 x 110 x 57 mm
  • For operation with LEDs a 9 V power supply or a 9 V battery is required (both not included)
Produkt dostępny od Luty 2012
Numer artykułu 275618
Jednostka sprzedaży 1 szt.
Type A/B, A+B
LED Display Yes
PSU Connector Yes
Shape Floor Effects Pedal
MIDI Interface No
248 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Czwartek, 4.04. and Piątek, 5.04.
1

246 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

właściwości

wykończenie

133 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
C
Quality switch
Colm 13.11.2017
I use this for live gigs when using two amps, makes life a lot easier. The LED's make it very clear to what amps are active. Very good product.
właściwości
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
E
Switchblade plus
Eurospace 03.12.2013
Just like the TARDIS, the Switchblade + is smaller on the outside. Very small indeed. Some might find it too small - I'd say try it first. It is robustly built in the typical EH die-cast case, with bright LEDs and conveniently placed foot switches and promptly labelled ins and outs.

The Switchblade is a channel selector - it sends the input signal to channel A, B, or both. There's a tuner output as well - if you don't need to connect a tuner, you can use this to output a separate channel; however, be warned that it bypasses the Switchblade and cannot be switched on or off.

The left foot switch toggles between output A and B. The right switch runs both outputs in parallel. When the right foot switch is engaged, the left one is disabled, which makes sense.

The unit is completely passive and works without electricity. The LEDs, though, need juice to show what's on and what's off. They consume so little that a 9V battery should last ages: EH, however, have added a DC-in socket. Nice touch, but unnecessary.

The Switchblade is true bypass, as you would expect from a product of this type.

They say it works if you reverse it (channel A and B become inputs, and the input becomes an output) but I haven't tried it.

On the whole, Switchblade + turned out exactly as I'd imagined. It isn't a unique product but does what it says on the tin and does it well. Besides, it is priced very reasonably. Recommended.
właściwości
wykończenie
3
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Is a very good piece of gear
Anonimowy 07.05.2016
I use it to switch between the two channels of my Fender 68 Custom Deluxe Reverb amp.

I tested it to see if there is bleeding between channels and there was none. For example i turned channel A on in the switchblade but on the amp I put channel's A volume at 0 and channel's B volume at 8-9 and there was no sound coming from the amp.

Pros
price, works as expected, i liked the switching options (A or B or A&B), size, led displays.

Cons
None so far.
właściwości
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
WW
Great price-performance item
Wilson WIlsonson 20.06.2018
Use
I use this as a three way switch system to 2 guitar amps (A and the tuner outputs) and one bass amp (B output).

Pros:
The extra tuner output works well if you want to connect a third amp.
Relatively small size.
Good price compared to other products.
Good signal from all of the outputs.

Cons:
If a channel is switched off, there is still a weak, almost unnoticable signal that is going through (not sure if it is common for theres ones, but I have noticed the same behavior on a Fender ABY switch too).

Conclusion:
I would recommend this as a cheap alternative if there is a need for one guitar in - three amps out setup. The tuner output can be managed with the tuner pedal since it can not be turned off.
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat