Doepfer A-180-2 Multiples

117

Passive Multi-Port Distributor

  • 8x Interconnected jacks
  • Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board)
  • Width: 2HP
Produkt dostępny od Maj 2013
Numer artykułu 315603
Jednostka sprzedaży 1 szt.
Width 2 TE / HP
149 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 30.03.
1

117 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

wykończenie

60 Opinie

MH
A solid pair of multiples.
Mr. Harold 25.10.2021
One of the most straightforward modules out there. It does what it's supposed to, no problems whatsoever. As usual with Doepfer, the build quality is very good. Recommended.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
This mult unit is very cheap but you might need more
Anonimowy 20.01.2016
One thing to note firstly is that despite a lot of what you might read in product information on this and other sites the design of this module has changed slightly. When it is shipped from the factory the middle solder bridge between the two groups of four sockets is not joined, so it is now shipped as standard functioning as two groups of four interconnected jack sockets. If you require an eight-way mult you simply have to join the two groups together at the back of the panel. Just a line of solder will do the job. There's not much to say about this unit, other than the build quality is great - as you would expect from Doepfer - and the unit is competitively priced. I don't see any reason to pay more for equivalent modules from other manufacturers, in which case you would simply be paying for the name. One thing I will point out: if you plan to use this module to multiply CV input to drive oscillators then spend a bit more and get the buffered mult unit A-180-3. This will ensure that voltage is consistent on all outputs, meaning that your oscillators will be easier to get in tune with each other and will track correctly.
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
e
Handy utility. Does what it is supposed to do.
emyn 13.12.2021
It mults your signal(s) passively, as promised. And it does so without issues.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
1B
Better than the spiders
1 BPM 22.05.2021
Before I took this mult, I was using spiders, but half of the spiders started to fail, which is kinda weird. Anyway, I decided to use rack mult and do not regret. Takes very littel rack space and the connectors feel snug and reliable.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat