Doepfer A-110-4 Thru Zero Quad VCO

7

Zero Quadrature VCO

The oscillator generates sine and cosine waveforms at the same time. These are terminated as soon as the linear control voltage reaches 0 V.

  • 2 Control sections: Linear and exponential
  • Controller for XTune, XFM, LFrq and LFM
  • Width: 8HP / 40.3 mm
  • Depth: 60 mm
  • Power requirements: 90 mA
Produkt dostępny od Lipiec 2015
Numer artykułu 367623
Jednostka sprzedaży 1 szt.
Analog Yes
Digital No
Width 8 TE / HP
variants Doepfer
593 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny za 1-2 tygodnie
Dostępny za 1-2 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

7 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

wykończenie

5 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
W
Thru-zero on a budget
William6729 26.02.2016
If you know what it means when an oscillator can go thru-zero, then great. It definitely sounds like a cool thing for an oscillator to be able to do. Luckily, it does sound great. This is great for creating beautiful bells and metallic sounds. Probably not the best choice as a first oscillator as it is quite limited compared to some, but most other oscillators are not thru-zero. To get the most interesting sounds make sure you at least one other oscillator in order to modulate the A-110-4.
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Doepfer a 110-4
MartinoUltrawild 08.10.2017
Really nice VCO that has loads of differnts function, the amazing out in SINE and COSINE that allows you to reach many different sound shape. Really recommend even for tom, perc, pluck and most of the percussive sounds with a super pouchy sound ! 10
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
Ta
FM VCO
T. aus H. 20.07.2015
Interessantes Modul, die Sinuswellen kommen mit ca. 2.5Vpp aus den Ausgängen, bei meinen zweien leider mit unterschiedlichen Pegeln.
Derzeit ohne Gebrauchsanweisung, die Einstellanweisung hilft aber ein wenig

Bei Betrieb ohne Signal auf dem CV-Bus unbedingt den Jumper unten auf "nicht verbunden" stecken, sonst werden ggf. andere Module beeinflußt.
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
C
Chrism. 10.04.2018
Ein schöner Oscillator für Percussions in Verbindung mit einem Lowpass Gate.

Ich hätte mir allerdings damals (habe ihn schon etwas länger) eine detailiertere Beschreibung seitens Doepfer, über Thru Zero gewünscht.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie