Doepfer A-100LC9 PSU3 Low Cost Case

Case for A-100 module

  • 9U with three module rows
  • External dimensions (W x H x D): Approx. 445 x 420 x 160 mm
  • Internal dimensions (W x H x D): 3 x 84 HP x 3 U
  • Usable depth for A-100 modules: About 80 mm in the area of the power supply (bottom right), otherwise around 100 mm (measured from the inside of the front panel)
  • Weight without module: 4.3 kg
  • PSU3 power supply (+12 V/2000 mA, -12 V/1200 mA,+5 V/4000 mA, 100 - 230 V)

Dalsze informacje

System Eurorack
Width 3 x 84 TE / HP
Hight 9 U
Power Supply Yes
Formfactor Case

Tak wybrali inni klienci

Klienci, którzy oglądali ten artykuł kupili:

Doepfer A-100LC9 PSU3 Low Cost Case
34% klientów kupiło dokładnie ten produkt
Doepfer A-100LC9 PSU3 Low Cost Case
Artykuł dostępny w magazynie
Artykuł dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki
435 € Do koszyka
Behringer Eurorack Go
15% klientów kupiło Behringer Eurorack Go 255 €
Arturia RackBrute 6U
8% klientów kupiło Arturia RackBrute 6U 329 €
Behringer Eurorack Rack
7% klientów kupiło Behringer Eurorack Rack 98 €
Doepfer A-100 LC6 Case 6HE PSU3
6% klientów kupiło Doepfer A-100 LC6 Case 6HE PSU3 375 €
Najpopularniejsze Obudowy Eurorack
29 Oceny klientów
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • właściwości
  • wykończenie
Aktualnie ten produkt posiada ocenę tylko w innym języku.
gb Oryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
Best option on the market.
Amplitudarnik, 14.10.2017
Doepfer A-100 LC9 is probably the most popular case for entrance to the eurorack world, and there's a good reason for that: it's affordable, and it's reliable. The power supply PSU3 replaced the older PSU2; this one is more reliable, provides more overall amperage for modules and is compatible with modules that need +5V power rail without the need for an adapter.

Even if this is LC9 (low cost unit), finish is done quite well: power rails are sturdy, screw rails are not misaligned and wooden casing is firm. Wood is not painted or even lacquered. It's a pity there are no rubber legs on the bottom and some indentation on the top; some people will miss a handle too. I guess you can't have everything.

My only complaint is grounding issue; if I plug my headphones directly in a mixer cranked up to the maximum, sometimes I can hear very faint leakage from one of my oscillators. On normal levels this won't affect the sound. And if wider experienced community is to be trusted, it shouldn't stop you from interconnecting two or more cases. It's still advisable to do some extra grounding as it will increase the longevity of your case.

LC9 is the best option for starters and the most affordable price-per-size unit. There is simply nothing else quite comparable on the worldwide market. I will certainly get one more.

(The power supply will work anywhere in the world; Thomann sends extra cable with plug (rather than a cheap adapter) that fits your local power outlet if you are not in continental Europe.)
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
gb Oryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
właściwości
wykończenie
Fantastic case
BenEl, 26.09.2020
I love the LC9 - excellent build quality, loads of reliable power, nice quality wood and finish. Simple but high grade.
If you want it to be portable this probably isn’t the case for you - as there’s no lid, handles etc - it clearly isn’t designed to be a mobile system.
But if it’s for permanent / semi-permanent home or studio use I think this is a great option.
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
gb Oryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
właściwości
wykończenie
Hard to beat !
Legreg, 20.11.2019
I needed a 2nd case. I considered building one, but after long evaluation of possible options, came to the conclusion that the LC9 was making the DIY effort (financially and time-wise) pointless.
No regret. This thing is very well built. Looks and feels rock solid. Absolutely beats my expectations.
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
gb Oryginalna ocena (Pokaż tłumaczenia)
Wystąpił błąd. Proszę spróbować później.
Łącznie
If you need a rack with enough P, for a good price I think you'll find no other deal like this
Tunnel One, 13.10.2017
If you are not the handy type, and don't really feel up to building your own rack or case I think the low cost case from doepfer is the best solution. It is well built, sturdy, and has power supply and sockets installed. The wood for the case is not special, but still nice enough , i even prefer it over black or flight case style racks. If you are a bit artistic the wooden case is even great for doing your own drawing or painting on it for your unique case.
Przydatne · Nieprzydatne · Zgłoś nadużycie
Zgłoś nadużycie...

Czy ta opinia powinna zostać usunięta?

Wyślij
Wyświetl wariacje tego produktu
Doepfer A-100LC9 PSU3 Low Cost Case
(29)
Doepfer A-100LC9 PSU3 Low Cost Case

Case for A-100 module 9U with three module rows, External dimensions (W x H x D): Approx. 445 x 420 x 160 mm, Internal dimensions (W x H x D): 3 x 84 HP x 3 U, Usable depth for A-100 modules: About...

Doepfer A-100P9 Case PSU3
(38)
Doepfer A-100P9 Case PSU3

Base frame in the case Three rows with 84 HP each for the installation of modules, 3x 3 H3, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise approx....

Doepfer A-100 PMS 12 PSU3
(8)
Doepfer A-100 PMS 12 PSU3

Monster Single Compartment Suitcase 168HP / 12U 230 (4 x A-100PSU3)

Doepfer A-100 LC6 Case 6HE PSU3
(22)
Doepfer A-100 LC6 Case 6HE PSU3

Original Doepfer case Untreated (no paint and/or lacquer) body constructed from "raw" wood, External dimensions: approx. 445 x 275 x 160 mm, Interior dimensions: approx. 2x 84 HP x 3 U, Usable...

Doepfer A-100LC3 Low Cost Case
(47)
Doepfer A-100LC3 Low Cost Case

Case for Modules A number with 84 HP for installation of modules, Incl. external power supply (1200 mA) and bus board, Dimensions (W x H x D): approx. 445 x 150 x 160 mm

Doepfer A-100 PMS 9 PSU3
Doepfer A-100 PMS 9 PSU3

Doepfer A-100 PMS 9 Monster Case PSU3; 168HP/9U; 100-240V; 2 build-on A-100PSU3: +12V/4000 mA, -12V/2400mA, +5V/8000mA; 6 Doepfer A-100 V6 Bus Boards with headers for up to 132 modules; useable...

Doepfer A-100P6 Case PSU3
(10)
Doepfer A-100P6 Case PSU3

Case with base frame Two rows with 84 HP each for installing modules, 2x 3 H3, Dimensions: approx. 465 x 330 x 170 mm, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower ...

Doepfer A-100PB PSU3
(6)
Doepfer A-100PB PSU3

Substructure housing for modules 2x 84 HP, With PSU3 power supply: +12 V / 2000 mA, -12 V / 1200 mA, +5 V / 4000 mA, 100 - 230 V, Removable lid with carrying handle, Steel ball corners, Max. depth...

Doepfer A-100PMB Monster Base PSU3
(13)
Doepfer A-100PMB Monster Base PSU3

Monster Case Substructure 168HP / 6U 230V, With 2 x PSU3 power supply (+ 12V / 2000mA, -12V / 1200mA, 100 - 230V), Removable lid with carrying handle, 4 Backplanes installed, Optional modules,...

Doepfer A-100 G6 PSU3
(14)
Doepfer A-100 G6 PSU3

Base frame For modular system A100, Height 6 U, Usable width: 84 TE, With PSU3 power supply (+12 V/2000 mA, -12 V/1200 mA,+5 V/4000 mA, 100 - 230 V)

Doepfer A-100LCB PSU3
(11)
Doepfer A-100LCB PSU3

Low cost base With PSU3 power supply (+ 12V / 2000 mA, -12V / 1200 mA, +5V / 4000 mA, 100 - 230 V), Two module rows, 2x 3 U / 84 HP, Ideal as a base for the A-100LC6 / LC9 or as stand-alone...

435 € 1 980,28 zł
Ceny z podatkiem VAT

Cena w PLN podana jest w celach orientacyjnych

Artykuł dostępny w magazynie
Artykuł dostępny w magazynie

Artykuł jest dostępny od ręki.

Informacje dotyczące wysyłki

Darmowa dostawa spodziewana pomiędzy Czwartek, 24.06. a Piątek, 25.06.

Powiadom innych o tym produkcie
Twój asystent sprzedaży
Tel: +49-9546-9223-30
Fax: +49-9546-922328
Ostatnio obejrzane
iZotope Community Appreciation Bundle

iZotope Community Appreciation Bundle (ESD); plug-in bundle; contains 11 essential tools for audio editing and creative music production; consists of Nectar Elements, Neutron Elements, Ozone Elements, RX Elements, BreakTweaker, Stutter Edit 2, Iris 2, Trash 2 as well as Exponential…

3
(3)
Ostatnio obejrzane
DSM & Humboldt Simplifier DLX Amp/Cab Sim

DSM & Humboldt Simplifier Deluxe Amp/Cab Simulator; Effects Pedal for Electric Guitar; Pre-Amp, Power-Amp and Cab-Simulator; all Analog 0 Watt Dual Channel Amp, with Cab Simulator, multistage Reverb, and versatile connectivity options; All, in an extremely small format; 2 Studio…

Ostatnio obejrzane
XAOC Devices Moskwa II

XAOC Devices Moskawa II; Eurorack module; 8 Step Rotosequencer; 8 steps, each with CV control knob and on/off button; for each step programmable functions like slew (portamento), slew probability, gate/trigger probability; up to 8 gate/trigger pattern programmable for each step;…

Ostatnio obejrzane
Casio CT-S1RD

Casio CT-S1RD Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

3
(3)
Ostatnio obejrzane
Quilter Superblock US

Quilter Superblock US, Solid State Pedalboard Amplifier for Electric Guitar; Three Classic US Amplifier voicings: 60 Tweed, 62 Blonde & 65 Black; comparable power to a 25-Watt Tube Amp when powered by the supplied PS-24 Power Supply or 1 Watt…

Ostatnio obejrzane
Fender SQ Aff. Jazz Bass MN Black

Fender Squier Affinity Jazz Bass MN Black; Electric Bass, Affinity Series; Body: Poplar; Neck: Maple; Neck Mount: Bolt On; Neck Form: C; Fingerboard: Maple; Inlays: Black Dots; 20 Medium Jumbo Frets; Nut: synthetic Bone; Nut Width: 38,1 mm (1,5"); Scale:…

Ostatnio obejrzane
Zhiyun WEEBILL-S Gimbal

Zhiyun WEEBILL-S Gimbal; Three-axis gimbal for DSLR and mirrorless system cameras; simple and safe handling thanks to new algorithms and stronger motors even for fast movements; compact dimensions make the gimbal the perfect companion for reportage and action shots; ergonomically…

Ostatnio obejrzane
RAV Vast B/H Kurd red

RAV Vast2 B Kurd red edition, B2/ F#3, G3, A3, B3, C#4, D4, E4, F#4, A4, Handpans-inspired steel tongue instrument, 2mm Steel, diameter 51cm, hight 17cm, weight 5,9kg, incl. bag

Ostatnio obejrzane
Zhiyun Smooth Q3 Gimbal

Zhiyun Smooth Q3 Gimbal; professional 3-axis stabiliser for smartphones; integrated fill light with three brightness levels; gesture control and Smart Following for automated tracking of people in the field of view; panorama mode with "Magic Clone" function; ZY Cami app…

Ostatnio obejrzane
XAOC Devices Ostankino II

XAOC Devices Ostankino II; Eurorack Modul; expander for Moskwa II sequencer (item 521036); expands Moskwa II with CV inputs for Random Play, Slew, Probability, Transpose, Range, Clock Rate, First Step, Last Step; oputput for the internal clock signal; individual gate…

Ostatnio obejrzane
Casio CT-S1WE

Casio CT-S1WE Keyboard with Piano-Look - 61 touch-responsive keys, 64-note polyphony, AiX Sound Source, 61 sounds, Reverb, Chorus, Delay, DSP, Master EQ, Volume Sync EQ, connection to free Chordana Play For Keyboard App, Midi, transpose, metronome, midi record, headphone/line stereo…

1
(1)
Ostatnio obejrzane
Libec TH-Z Camera Tripod

Libec TH-Z Camera Tripod; tripod system with tilt and centre spreader; features a video head (TH-Z H) with DualHead system, that can be used for both 75 mm half shell and flat base tripods; video head can be mounted on…

Twoja opinia
Zgłoś błąd Zauważyles błąd i chciałbys nas o tym powiadomić?

Dziękujemy za Twoją wiadomość, zostanie ona przetworzona najszybciej jak to możliwe.