Doepfer A-142-4 Quad decay
- Single-Parameter: Decay
- Manual adjustment of the decay time for each unit in the range of about 2 ms to 2 s
- Setting the attack time by trimming potentiometer for each unit between about 1 ms and 15 ms is possible
- 1x LED per envelope output
- Normalized trigger inputs (1 -> 2 -> 3 -> 4)
Podobne produkty i akcesoria
1–2 z 4 ocenWszystkie oceny
four envelopes in the space of one!
In just 8HP Doepfer have squeezed in 4 decay envelopes! I rarely make a patch that doesn't use this module in one way or another. It can have a really sharp decay so can make snappy rhythmic sounds fantastically well. I often use it triggered by some different rhythms from a logic module to make drum machine sounds. In conjunction with the A-151 Sequential Switch you can make a varying decay for a filter cutoff, for example. Mix two together one triggered by a sequencer clock and the other by one step in the sequence and you can generate an accent.
Put the CV through a slew limiter and you can add an attack portion to the envelope too. Jumpers on the circuit give you options for looping too.
This is another module that you'll keep finding new ways to use. And it's got flashing LEDs to let you know what it's doing.
4 modulation sources in just 8hp
4x Envelope Single-Parameter: Decay, Manual adjustment of the decay time for each unit in the range of about 2 ms to 2 s, Setting the attack time by trimming potentiometer for each unit between...
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
Wasp Filter Special edition, Black front, Yellow knobs
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Doepfer A-180-3 Dual Buffered Multiples, dual buffered 1-in-3 multiple to copying/buffering of control and audio signals, Width: 4 TE / 4HP / 20.0 mm
Doepfer A-111-2; High End VCO II / VCLFO; Width: 14 HP, Current: +70mA (+12V) / -50mA (-12V)
Doepfer A-119 - external input/envelope follower; Width: 8HP / 40.3 mm; Depth: 45 mm (measured from the rear side of the front panel); Current: +30mA (+12V) / -20mA (-12V)
Module Dual linear/exponential, VCA
Doepfer A-199 Spring Reverb Module - electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical...
Doepfer A-138b - mixer with logarithmic potentiometers.
Frequency divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm
Noise/Random Voltage Generator Module A-118 is a noise and random voltage generator. It produces the following signals: white noise, coloured noise, and random voltage. White and coloured noise can...
Doepfer A-143-2 Quad ADSR - 4x independent ADSR-type envelope generators.
LFO Modulation Generator The module A-145 (LFO) is a low frequency oscillator, which generates periodic control signals in a wide frequency range. Five wave forms are available: saw tooth, inverted...
Doepfer A-110-4 Thru Zero Quadrature - VCO oscillator generates sine and cosine waveforms at the same time. These are terminated as soon as the linear control voltage reaches 0V. Special edition...
Doepfer A-111-3; Micro Precision VCO / VCLFO; Width: 4 HP, Current: +40mA (+12V) / -40mA (-12V)
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) /...
Doepfer A-147-2 VCD LFO Module, Voltage Controlled Delayed Low Frequency Oscillator, Module contains VCLFO: voltage controlled low frequency oscillator, VCA: voltage controlled amplifier, switchable...
Basic VCO for the A-100 modular system Voltage controlled oscillator, 3-Position toggle switch, Linear FM input and soft-sync input, Tune control range can be set between approx. 1/2 octave and 4...
Faktura w walucie euro
|Cena za||1 szt.|
|Produkt dostępny od||czerwiec 2012|
|w tej kategorii||Ranga 216|
|na thomann.de||Ranga 39951|