BluGuitar Midi1

37

MIDI Adapter

  • To control the BluGuitar AMP1 by an external MIDI controller
  • Connect to the remote socket of the AMP1
  • This is used to call up all the AMP1 switching functions via MIDI Program Change commands as well as control of Master Volume, Gain / Clean Volume, and PowerSoak via MIDI Control Change commands
Produkt dostępny od Marzec 2015
Numer artykułu 357118
Jednostka sprzedaży 1 szt.
Type MIDI Switch
LED Display No
PSU Connector No
Shape Floor Effects Pedal
MIDI Interface Yes
208 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 19.04.
1

37 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

właściwości

wykończenie

29 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
does the job
Shawtarce 11.10.2020
allowed me to connect my Amp1 to my HX stomp.
Did the job great.
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
RD
Good, expensive and a bit confusing
Rohan D. 29.01.2016
This works well as a product. Unfortunately,
1. the MIDI manual was not very clear on the BluGuitar manual (I was using a TC Electronic Nova System at the time). After a lot of Googling, I found this: works perfectly, but I just wish this information was in the manual or bundled with the cable itself.

and
2. It's quite expensive for just a little cable!

Otherwise, works flawlessly.
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
Works great
David3186 15.06.2015
Bought to control my AMP1 via midi, works like a charm. If you have any problems then check with BluGuitar, there are two different firmware versions and your AMP1 might work slightly differently to the instructions. Mine did, and a quick email solved the problem.
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
midi up
StratfordBob 10.05.2017
Bought to midi switch the Bluguitar Amp1

Works great.

Seems alot for a small lead, but it does the job perfectly.
właściwości
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat