Behringer Powerplay PM1

303

Mini-Bodypack

  • For mobile volume control of in-ear monitoring or headphones
  • Input: XLR - stereo headphone signal (pin 1: GND, 2: L, 3: R)
  • Output: 3.5 mm jack
Produkt dostępny od Styczeń 2016
Numer artykułu 374032
Jednostka sprzedaży 1 szt.
Type Volume Control
166 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 17.04.
1

303 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

162 Opinie

I
Uwaga!
ImaRRgam 14.03.2023
Przy zakupie warto zwrócić uwagę, że nie jest to zamiennik P2, tak jak sądzilem - tutaj nie mamy wzmocnienia, a sygnał jest przekazywany taki jakim jest, a więc mono dalej będzie mono, stereo pozostanie stereo.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

t
Bardzo polecam
tjakuszewicz 02.06.2017
Tania, mala, zgrabna rzecz, dobrze wykonana, nie sprawia wrazenia tandety. Dobrze sie nosi, dobrze gra. Polecam.
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
F
One of my favourite studio items!
Filam 20.12.2020
I use the Behringer Powerplay PM1 to extend my monitor headphones cord and be able to adjust the volume at the same time while recording in my home studio.

From my audio interface I start with a stereo-jack-to-xlr adapter, then an XLR cable, then the PM1, and then my headphones.

Using an XLR cable to lay on the floor feels much better than having one of those thin audio headphones extention cords.

Since I have the PM1 I always keep the volume of the headphones output on my audio interface at 100% and use the knob on the PM1 to control the volume of my headphones.

When recording I clip the PM1 to my belt and use the knob on the PM1 to easily choose the volume I that best suits the recording. Even during takes you can reach for the knob and adjust the volume without having to look down.

I never purchased something for my home studio that was this inexpensive and gave me such satisfaction!
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Easy control, great sound.
AVTECHUK 22.10.2017
I recently decided to put together a wired IEM system for live events. For many years I have used the Fisher version of this device and was interested in how these would compare. I decided to purchase 6 of these for my 6 channel headphone amp.

I bundled these with an ART headamp 6 pro.
The ART headamp 6 pro has 6 outputs along with 6 aux inputs (1 for each channel).

The PM1 requires the headphone amp to amplify the signal. I set my headphone amp volumes to just below full. This then gave the musicians full control of the volume using the PM1.

I decided to compare the PM1 against the Fisher alternative to see if there was any noticeable difference and all I can say is NO. The sound quality seemed the same.
The size again is very similar with the fisher being slightly longer.

The finish and feel of the PM1 is of a high quality. It feels durable and solid and the black finish makes if look sleek.

This is a product I will be highly recommending.
4
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat