Switchcraft 1/4" Mono Jack

2427

6.3 mm Mono Jack Socket

  • Inch thread
  • Thread length: 7 mm
  • Open 6.3 mm mono (TS) jack socket
  • US 3/8-32 thread
  • Nut and washer included
  • Made in USA
Produkt dostępny od Styczeń 2006
Numer artykułu 189475
Jednostka sprzedaży 1 szt.
Type Jack mono (female)
Colour Chrome
20,90 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 30.03.
1

2427 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

821 Opinie

MZ
Quality standard
Marcin Z 21.06.2023
Every guitar should have it installed - period.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

S
Extra
Superp77 28.02.2024
super jakość, super obsługa!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

M
Latwy do zamontowania
Miador 13.02.2019
Przylutowac, skrecic, dziala ;)
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
W
Allparts Switchcraft EP0055 Jack
WD555 30.04.2017
Allparts Switchcraft EP0055 Jack socket
I purchased a couple of Danelectro guitars around two years ago, (a DC59 mod and a DC59 12 string), both guitars turned out to be a lot of fun and for the price paid I have been presently surprised at the overall quality, the only real problem has been with the jacks which after a year of fairly regular use had started to get a little unreliable and after another 12 months really are knackered and do need to be replaced.
I have used the switchcraft jack sockets before to replace the input sockets on a little Fender Champion 600 valve amplifier, they were very easy to use and soldered easily with the threads being well cut and no rough edges or finish issues on the contact areas and they have worked reliably for a few years.
My only concern is the length of the thread, when I used them on the fender amp it was a fairly thin metal chassis front and there was sufficient thread length on the jack socket, I can see this would also work of fender straocasters of telecasters as the mountings are also fairly thin metal but the danelectro pickguards are thicker and made from fairly thick hardboard so I will find out if the threads are long enough when I strip them down soon and will update this review at that time.
wykończenie
3
2
Zgłoś nadużycie

Zgłoś nadużycie