Allparts CTS 1 Meg Split Audio Pot

47

Potentiometer for Guitar + Bass

  • CTS potentiometers are the first choice on many American guitars
  • Low tolerance for greater accuracy
  • Resistance: 1000 kOhm
  • Resistance profile: Logarithmic
  • Shaft: Knurled
  • Shaft length: 9.5 mm
  • Thread diameter (hole): 9.5 mm
  • Made in USA
Produkt dostępny od Kwiecień 2016
Numer artykułu 384567
Jednostka sprzedaży 1 szt.
Design Audio Taper
Resistance Value 1000 kOhms
Characteristic Curve Logarithmic
Thread Length 10,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
38 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 30.03.
1

47 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

24 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
EB
Allparts reliability...
Edgar Blackdagger 07.08.2022
What I found with any Allparts pots I've bought is that they go wrong like no others.
Within the first 6 months, if the knob is at 10 and you accidentally turn it slightly more, it momentarily kills the sound, so if you're playing with the volume at 6 and you want to to to 10 for a solo, you first get muted for 1/4 of a second, which is something that of course gets worse during the first year and you have to be unreasonably careful.
During the second year, there come the crackles from dust, no matter the guitar or application you're using it, which is something that happens too soon compared with other pot brands.
These may say CTS but the quality control is AllParts...
I prefer Japanese Goldos, they are practically immortal.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
DO NOT BUY THIS POT
Deadhead0987 28.03.2022
I am URGING you not to buy this pot. After soldering together, Lug 1 snapped clean off after minimal soldering time on the lug. This has NEVER happened to me before. Truly unacceptable, I am NEVER buying from these guys again.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
fine quality-good value
Anonimowy 08.12.2016
Works as it should be. I use it as tone pot. It seems to be more like a modern log taper (10% log), so it has a bit steep change of resistance. Total resistance value is close enough to stated value (about 1019 ohms). I would prefer it to have lower friction in order to turn easier. I play strats so i want pots to be loose enough so i can change value with my pinky. This pot is in the middle ground.
A fine product.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
CTS pots are worth the hype.
DonSchlup 08.11.2020
Used to upgrade my Squier J Mascis Jazzmaster, they're well worth it. The stock ones were a bit scratchy, and didn't have a nice taper, but these are just right, making the guitar feel a bit more like a proper Fender. No semblance of complaints here, for sure!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie