Adam Hall D 921 Base Plate

122

Mounting Plate for Gooseneck

  • For mounting to a table
  • Suitable for goosenecks with 3/8" thread
  • Dimensions: 30 x 45 mm
Produkt dostępny od Luty 2016
Numer artykułu 380871
Jednostka sprzedaży 1 szt.
Component type Shockmount Tabletop Mounting
18,90 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 18.04.
1

122 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

61 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
DC
Ideal for wood, walls, and ceilings
Daniel C 18.08.2017
Very useful mounting plates for microphones. As I discovered when they arrived, this actually consits of a 5/8" threaded base, and a 5/8" to 3/8" thread adapter. The base is one solid piece, and can take weight very well at any angle, having held large condenser microphones on a wall for a 9-10 month stretch, and still going strong!
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
HZ
Never use with an expensive and heavy condenser mic!
Honza Z 29.12.2020
I used the base plate to create an improvised table stand for a condenser mic (the base plate was mounted at the bottom of the desk, with a boom arm attached to it). During regular usage, it broke -- literally falling apart into two pieces -- making my condenser fall down from app 5 ft. Fortunately, the mic survived, but...
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Cheap non pro base plate for permanent assemble
Massamaahinen 09.10.2020
I was slightly disappointed as I was waiting for better quality. The base plate feels cheap and the threading is not smooth. I ordered this for continuos use between a table and stand where I screw it on and off often and this isn't good for that. If you use this for permanent mounting, it is OK.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Perfect for the price.
TheAwesomeGuy101 24.10.2020
This Base plate is perfect for mounting in walls or woods, or any other materials. I have received one set that has corrosion/rust inside one of the screw adapters, it's working fine though, this is just a quality issue maybe in the factory, I just sprayed some WD-40 into it and it works fine.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie