Klark Teknik DN32 ADAT

14

ADAT uitbreidingsmodule

  • Met maximaal 32 bi-directionele kanalen voor Midas M32 of Behringer X32
  • Gelijktijdig opnemen en afspelen tot 32 kanalen bij 48 kHz
  • Heeft 4 ingangen en 4 uitgangen via optische TOSLINK verbinding
  • BNC word clock ingang of uitgang voor externe kloksynchronisatie
  • Ideaal voor studio- en live-opnames met ADAT-uitgeruste HD-recorders
Leverbaar sinds Maart 2017
artikelnummer 409034
verkoopseenheid 1 stuk
Extension Card for Behringer
Type ADAT
€ 243
alle prijzen incl. btw
direct leverbaar
direct leverbaar

Dit product is op voorraad en kan direct verzonden worden.

Informatie over de verzending
Levering zonder verzendkosten tot ongeveer Vrijdag, 19.04.
1

14 Klantenbeoordelingen

5 / 5

U moet ingelogd zijn om producten te evalueren.

Note: Om te voorkomen dat evaluaties gebaseerd zijn op roddel, geruchten of heimelijke advertentie staan wij op onze website alleen evaluaties toe van daadwerkelijke gebruikers die het geevalueerde product bij ons gekocht hebben.

Na inloggen vindt u alle producten die u kunt evalueren ook onder “Product evalueren” in uw klantencentrum.

afwerking

11 Recensies

R
Klark adat
Rinud 15.05.2023
Dit artikel werkt perfect.
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
F
Expand your X32 with ease!
Fresha 23.11.2020
After doing a fairly rapid search for an expansion board for the X32 Compact, I came across this well priced and quality-build ADAT expansion perfect for my studio requirements (replacing a lightpiped Macke d8b was a task in itself) - seeing that the X-ADAT by Behringer was at a great price already, then stumbled across Klark Teknik's version, which basically is the same bar the manufacture print on the back plane - and after a little more reading confirmation this works in Midas M32 and Behringer X32 mixers - superb!

Swapping out the X32 USB board and plugging this is is child's play (make sure you get the board to sit on the two runners at the opening for a very fast plug-n-play). Two screws on the side, pull out, push in, screw in, plug in your optical cables (check your outer plug size as mine were a little larger and I had to do some surgical 'shaving' - maybe the sockets are a little closer than normal but due to the real-estate available), and turn on the X32, fires up and accepts the card in seconds. Workclock is solid too, just match up your sample rate to your system and you're golden.

Summary - if you're looking for a suitable expansion without breaking the bank, you can't go wrong with this one!
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
IP
Easy to Install - Works Perfectly
Irland Paul 26.08.2022
I have an Behringer X32 Rack for studio artist monitoring coupled with a Lynx Aurora 16 recording AD Converter. There is a Lynx ADAT daughter card in my Mac hooked up to the Lynx AES16e main card there. I needed for my Lynx system to be able to communicate with the X32 via ADAT in order to send monitor mixes to any artist listening on their Behringer personal monitor. I could have achieved this with analog cables but ADAT seemed a much neater solution.

The X32 did not come with an ADAT card so I used the DN32 in place of the USB card that came pre-installed with it. Installation was extraordinarily easy and painless. Also - the Klark Teknik version is much cheaper than the Behringer card and is essentially the same - as far as I can tell. It has worked perfectly and I am very pleased thus far. Highly recommended.
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
I
Works perfectly
Imposter 13.06.2022
Using this with a rme hammerfall card to interface to my daw works perfectly simple to install
afwerking
0
0
Evaluatie melden

Evaluatie melden