Thon Rack 6U Eco II 35

187

Superlight Rack

  • 6 U working height
  • 33 cm Built-in depth
  • Material: 7 mm double layered plastic
  • 25 x 22 mm aluminium edges
  • Stepless rack rail
  • Front and rear covers
  • Spring locks
  • Large rubber feet
  • Case grip
  • Outside dimensions: 53.5 x 31.5 x 46 cm
  • Weight: 5.1 kg
  • Colour: Black
  • Incl. Mounting material
  • Made in Germany
Numero di articolo 103471
Unità incluse 1 Pezzo
Formfactor 19"
Construction Type Double-Door
Vertical Height Units 6 U
Internal Depht [mm] 330 mm
Horizontal Height Units 0 U
with display stand No
Rack rail at the back No
Service flap No
With Wheels No
Trolley No
Shock Mount No
Clasps Snap lock
Material Plastic
Colour dark Brown
External Width 535 mm
External Height [mm] 315 mm
External Depht [mm] 460 mm
Weight 5,1 kg
Mostra altro
€ 99
Spedizione gratuita, incl. IVA
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

187 Valutazioni dei clienti

4.4 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

stabilitá

manipolazione

Qualità

82 Recensioni

CR
Ottimo
Cristian Rocco 18.05.2023
Solido, robusto, ben costruito, insomma quasi perfetto.
Unica, piccola, pecca, la presenza di una sola maniglia, quindi spostandolo manualmente diventa un po' una "grossa valigia", ma essendo molto leggero non è un grosso problema.
stabilitá
manipolazione
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
R
Value for money effects racking
Roland8453 27.12.2013
Purchased for use beside PA desk on live gigs. Installed a couple of Lexicon units and graphics for FOH and Monitors.
Dimensions are perfect for these units with space inside to hide short multicores, PSU's and the power bar which I tend to fix in with self adhesive Velcro. It is also takes up less overall space than its GRP alternatives.
Build quality is good and the catches are sturdy, but its construction materials are less robust than the GRP ones and so don't buy unless you treat all your gear with care!
One thing which concerns me is the way the handle is attached. It is secured with two pop rivets with moderately large heads. When lifted the material inside the lid frame flexes and I would have been happier if there had been a rectangular pad of some thin materials to spread the weight. However only time will tell whether the pop rivets pull through the plastic of the lid.
Certainly good value for money.
stabilitá
manipolazione
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
OK Rack box
Anonimo 22.12.2014
I purchased this because the price was right but should have read the description better... these are ECO racks, not the same sturdy material most flight cases are made of. Bought this for the studio and to move around / within the studio - if I need to so its OK but the pictures seem to not show that the material (black) is actually not resistant. Hit it in the corner of a table or somewhere and it will be ruined in no time.
stabilitá
manipolazione
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Good rack for light travelling
Anonimo 17.11.2016
I have this rack case for a while now, and mostly used it at home for music listening with the covers open. It is a travel rack, but the travel holder seems a bit weak as it is not reinforced with metal, it is locked in the wood directly. I used 5 of the 6U and one is a power strip (very light). The remaining 4U are taken by a 1U mixer, a 1U EQ and a 2U power amplifier and it does seem a bit not reliable to hold it by it's handle holder because of the total weight. I can assume that the handle would be unusable and would break the wood if using for example 3 amplifiers like mine that would take all 6Us, because they are the heaviest. But, if you carry it with both hands, there is no problem, the aluminium frame is sturdy. I like the independent screws, in that you are not forced to use the standard holes for your gear. I recommend this rack case for home studios and light travel, but take note of the weight load when adding gear in it.
stabilitá
manipolazione
0
0
Segnala un abuso

Segnala un abuso