the sssnake PNT 20

114

Combination Cables

  • Wound onto plastic cable drum with audio signal and power (3x 0.75 mm²) 20 m
  • Cable diameter: 18 mm
  • Split ends: 22cm
  • Weight: 4 kg
In catalogo dal Giugno 2011
Numero di articolo 255343
Unitá incluse 1 Pezzo
Type Combination cable
From Connector Power Plug C14 male
Connector 2 Power Connector C13 female
Length 20,00 m
Outdoor suitable? No
Incl. Cable Drum Yes
Core Diameter 0,75 mm²
Colour Black
From Plug C14 male
To Plug C13 female
Power Cable 1
Connector 1 XLR 3-pol male
Audio Cable 1
Wire Diameter 0,75 mm
DMX Cable 0
Cable Drum 1
LAN Cable 0
Outside Diameter 18 mm
Combi Cable 1
Lenght 20 m
Mostra altro
€ 69
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

114 Valutazioni dei clienti

4.6 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

51 Recensioni

j
PRODOTTO MOLTO ECONOMICO
jackfa 02.11.2017
Quando ho acquistato la prima bobina, ero felicissimo, in quanto potevo portare alimentazione e segnale a distanze decisamente elevate, senza dover tirare due cavi distinti. Tutto è andato bene finché il segnale interno non si è interrotto, ovviamente non so dove, e quindi ora ho due bobine fantastiche inutilizzabili. Purtroppo malgrado il grosso spessore della guaina esterna, i cavetti internamente sono molto molto fini, cosa che capita molto spesso sui cavi economici, specialmente su questo tipo di cavo combinato alimentazione e segnale.
Qualità
0
0
Segnala un abuso

Segnala un abuso

B
Rapporto qualità prezzo TOP
Broadcast-Format 26.07.2023
Prodotto eccellente, ideale per la stesura rapida del cavo audio e corrente dal mixer/rack alle casse. Ottima la schermatura, nessunissime disturbo o ronza derivante dal passaggio della corrente
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
T
A very handy and versatile product
Tom2007 28.06.2016
This product is a bargain. Costs of IEC/XLR snakes are ridiculous and buying a premade one makes no economical sense, but this one is totally worth it. The cable is extremely thick, it could withstand anything. The connectors themselves are good quality and feel as if they'd last a while.

There are 3 common uses I have for this product:
1. DMX smoke machine / hazer power and signal. I often find at gigs that the hazer placement is miles away from a source of power and/or DMX, especially outdoors. This drum gives the flexibility of having your hazer up to 20m away.
2. Active speakers. Certain events call for speakers to be placed away from the stage, maybe for announcements in a different room or for music in the bar area etc. This is ideal for exactly that purpose.
3. Small event FOH position power and DMX. When there isn't a dedicated FOH control position, this product is great to get power from the stage and DMX to the stage. While 20m isn't enough for bigger events and I'd rather use a proper dedicated DMX cable to feed a bigger setup, this works absolutely fine for smaller gigs. The cable is very thick like I've said so fine for a stampede of spectators.

My only complaint is that the weight of the drum itself is not quite enough to withstand pulling on the cable. I normally hold the drum in position and unwind the whole lot into a heap to be used accordingly, then wind up the excess once I'm wired up. Not a big deal though, it's such a small bit of kit I wouldn't expect anything else.

To get the most from this product, I recommend collecting together a few adaptors to make it as versatile as can be. A 4-gang or 6-gang 13a plugboard terminating in a male IEC is very handy for powering multiple pieces of equipment, if this is to be used for FOH for example. A 16a to IEC jumper is also handy if your working with 16a sockets. 5 to 3 and 3 to 5 adaptors for DMX flexibility is also a good idea.

Overall, fantastic. There isn't anything like this available from anywhere else, especially this cheap. A true asset to your kitlist.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
TB
Good tool
Thomas B. 558 31.05.2013
I use this cable as a DMX snake. I find it very useful but more so very good quality. The cable is very thick so it is safe and reliable. It is also mounted on a good sturdy reel which makes it easy for rolling and un rolling.
Qualità
3
0
Segnala un abuso

Segnala un abuso